CIOMP OpenIR
Design and Optimization for Mounting Primary Mirror with Reduced Sensitivity to Temperature Change in an Aerial Optoelectronic Sensor
M. J. Zhang; Q. P. Lu; H. A. Tian; D. J. Wang; C. Chen and X. Wang
2021
发表期刊Sensors
卷号21期号:23页码:15
摘要In order to improve the image quality of the aerial optoelectronic sensor over a wide range of temperature changes, high thermal adaptability of the primary mirror as the critical components is considered. Integrated optomechanical analysis and optimization for mounting primary mirrors are carried out. The mirror surface shape error caused by uniform temperature decrease was treated as the objective function, and the fundamental frequency of the mirror assembly and the surface shape error caused by gravity parallel or vertical to the optical axis are taken as the constraints. A detailed size optimization is conducted to optimize its dimension parameters. Sensitivities of the optical system performance with respect to the size parameters are further evaluated. The configuration of the primary mirror and the flexure are obtained. The simulated optimization results show that the size parameters differently affect the optical performance and which factors are the key. The mirror surface shape error under 30 degrees C uniform temperature decrease effectively decreased from 26.5 nm to 11.6 nm, despite the weight of the primary mirror assembly increases by 0.3 kg. Compared to the initial design, the value of the system's modulation transfer function (0 degrees field angle) is improved from 0.15 to 0.21. Namely, the optical performance of the camera under thermal load has been enhanced and thermal adaptability of the primary mirror has been obviously reinforced after optimization. Based on the optimized results, a prototype of the primary mirror assembly is manufactured and assembled. A ground thermal test was conducted to verify difference in imaging quality at room and low temperature, respectively. The image quality of the camera meets the requirements of the index despite degrading.
DOI10.3390/s21237993
URL查看原文
收录类别sci
语种英语
引用统计
文献类型期刊论文
条目标识符http://ir.ciomp.ac.cn/handle/181722/66525
专题中国科学院长春光学精密机械与物理研究所
推荐引用方式
GB/T 7714
M. J. Zhang,Q. P. Lu,H. A. Tian,et al. Design and Optimization for Mounting Primary Mirror with Reduced Sensitivity to Temperature Change in an Aerial Optoelectronic Sensor[J]. Sensors,2021,21(23):15.
APA M. J. Zhang,Q. P. Lu,H. A. Tian,D. J. Wang,&C. Chen and X. Wang.(2021).Design and Optimization for Mounting Primary Mirror with Reduced Sensitivity to Temperature Change in an Aerial Optoelectronic Sensor.Sensors,21(23),15.
MLA M. J. Zhang,et al."Design and Optimization for Mounting Primary Mirror with Reduced Sensitivity to Temperature Change in an Aerial Optoelectronic Sensor".Sensors 21.23(2021):15.
条目包含的文件 下载所有文件
文件名称/大小 文献类型 版本类型 开放类型 使用许可
Design and Optimizat(4764KB)期刊论文出版稿开放获取CC BY-NC-SA浏览 下载
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[M. J. Zhang]的文章
[Q. P. Lu]的文章
[H. A. Tian]的文章
百度学术
百度学术中相似的文章
[M. J. Zhang]的文章
[Q. P. Lu]的文章
[H. A. Tian]的文章
必应学术
必应学术中相似的文章
[M. J. Zhang]的文章
[Q. P. Lu]的文章
[H. A. Tian]的文章
相关权益政策
暂无数据
收藏/分享
文件名: Design and Optimization for Mounting Primary M.pdf
格式: Adobe PDF
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。