Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Parameter calibration of 6-degree-of-freedom parallel mechanism based on orthogonal displacement measuring system | |
L. Y; Y. F; F. C; X. P and d. D | |
2021 | |
发表期刊 | Optik
![]() |
ISSN | 304026 |
卷号 | 226 |
摘要 | Aiming at simplifying the parameter calibration process of the 6 degree-of-freedom(6-DOF) parallel mechanism, improving the calibration efficiency, and reducing the calibration cost, this paper proposes a pose measurement device and method based on the Orthogonal Displacement Measurement (ODM) system. First, the pose calculation method of the proposed device is studied, and its forward and inverse kinematics solutions are solved using spatial analytic geometry method; second, an error model for the combination of the parallel mechanism and the ODM system is constructed using the infinitesimal displacement synthesis method; third, based on the proposed error model, a mathematical model is constructed for the optimization problem of the parameter error identification of the combination, wherein the minimization of the sum of squares of in, the indicating value displayed by the sensor, is taken as the objective function, and the structural parameter errors of the combination are taken as the design variables; at last, the ODM system is used to measure the pose of the 6-DOF parallel mechanism, and the OASIS software is adopted to directly find out the optimal solutions of the parameter errors and compensate them to the parallel mechanism control system, so as to complete the parameter calibration of the parallel mechanism. The comparison result of the pose errors before and after the calibration shows that, the maximum position error has been reduced by 69 %94 %, and the maximum posture error has been reduced by 87 %97 %. Using ODM system to calibrate the parameters of the parallel mechanism can not only effectively improve the positioning accuracy of the parallel mechanism, but also simplify the calibration work, improve the calibration efficiency, and reduce the calibration cost. 2020 Elsevier GmbH |
DOI | 10.1016/j.ijleo.2020.165806 |
URL | 查看原文 |
收录类别 | SCI ; EI |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/65514 |
专题 | 中国科学院长春光学精密机械与物理研究所 |
推荐引用方式 GB/T 7714 | L. Y,Y. F,F. C,et al. Parameter calibration of 6-degree-of-freedom parallel mechanism based on orthogonal displacement measuring system[J]. Optik,2021,226. |
APA | L. Y,Y. F,F. C,&X. P and d. D.(2021).Parameter calibration of 6-degree-of-freedom parallel mechanism based on orthogonal displacement measuring system.Optik,226. |
MLA | L. Y,et al."Parameter calibration of 6-degree-of-freedom parallel mechanism based on orthogonal displacement measuring system".Optik 226(2021). |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Parameter calibratio(3320KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
谷歌学术 |
谷歌学术中相似的文章 |
[L. Y]的文章 |
[Y. F]的文章 |
[F. C]的文章 |
百度学术 |
百度学术中相似的文章 |
[L. Y]的文章 |
[Y. F]的文章 |
[F. C]的文章 |
必应学术 |
必应学术中相似的文章 |
[L. Y]的文章 |
[Y. F]的文章 |
[F. C]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论