Design and optimization for mounting primary mirror with reduced sensitivity to temperature change in an aerial optoelectronic sensor

doi:10.3390/s21237993

CIOMP OpenIR

	Design and optimization for mounting primary mirror with reduced sensitivity to temperature change in an aerial optoelectronic sensor
	M. Zhang; Q. Lu; H. Tian; D. Wang; C. Chen and X. Wang
	2021
发表期刊	Sensors
ISSN	14248220
卷号	21 期号:23
摘要	In order to improve the image quality of the aerial optoelectronic sensor over a wide range of temperature changes, high thermal adaptability of the primary mirror as the critical components is con-sidered. Integrated optomechanical analysis and optimization for mounting primary mirrors are carried out. The mirror surface shape error caused by uniform temperature decrease was treated as the objective function, and the fundamental frequency of the mirror assembly and the surface shape error caused by gravity parallel or vertical to the optical axis are taken as the constraints. A detailed size optimization is conducted to optimize its dimension parameters. Sensitivities of the optical system performance with respect to the size parameters are further evaluated. The configuration of the primary mirror and the flexure are obtained. The simulated optimization results show that the size parameters differently affect the optical performance and which factors are the key. The mirror surface shape error under 30 C uniform temperature decrease effectively decreased from 26.5 nm to 11.6 nm, despite the weight of the primary mirror assembly increases by 0.3 kg. Compared to the initial design, the value of the systems modulation transfer function (0 field angle) is improved from 0.15 to 0.21. Namely, the optical performance of the camera under thermal load has been enhanced and thermal adaptability of the primary mirror has been obviously reinforced after optimization. Based on the optimized results, a prototype of the primary mirror assembly is manufactured and assembled. A ground thermal test was conducted to verify differ-ence in imaging quality at room and low temperature, respectively. The image quality of the camera meets the requirements of the index despite degrading. 2021 by the authors. Licensee MDPI, Basel, Switzerland.
DOI	10.3390/s21237993
URL	查看原文
收录类别	EI
引用统计
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/65145
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	M. Zhang,Q. Lu,H. Tian,et al. Design and optimization for mounting primary mirror with reduced sensitivity to temperature change in an aerial optoelectronic sensor[J]. Sensors,2021,21(23).
APA	M. Zhang,Q. Lu,H. Tian,D. Wang,&C. Chen and X. Wang.(2021).Design and optimization for mounting primary mirror with reduced sensitivity to temperature change in an aerial optoelectronic sensor.Sensors,21(23).
MLA	M. Zhang,et al."Design and optimization for mounting primary mirror with reduced sensitivity to temperature change in an aerial optoelectronic sensor".Sensors 21.23(2021).

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Design and optimizat（4764KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载