Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Shafting design for precise two-dimensional turntable applied to 300 mm plane mirror | |
F.-N. Yu and S.-Y. Xu | |
2020 | |
发表期刊 | Guangxue Jingmi Gongcheng/Optics and Precision Engineering |
ISSN | 1004924X |
卷号 | 28期号:5页码:1075-1082 |
摘要 | The optical inspection system for the on-orbit assembly telescope mainly includes the sub-aperture co-phasing inspection and wave aberration detection of the system, they share a 300 mm plane mirror, therefore, the precise switching of plane mirror should be realized. A set of two-dimensional turntable based on general P2 level bearing was designed to meet the precise switching requirement. Firstly, the structures of the shafting system were designed and the assembly process was described in detail; then, the theoretical calculation model was built to analyze the accuracy of the designed shafting system, the results show that the maximum shaking error of the horizontal shafting system is 2.36"(PV), and the maximum shaking error of the vertical shafting system is 0.56"(PV). Finally, the accuracy of the shafting system was tested by using the Fourier harmonic analysis method. the practice shows that the maximum shaking error of horizontal shafting system is 2.5"(PV), and the maximum shaking error of vertical shafting system is 0.6"(PV), the perpendicularity of the two shafts tested by the method of pair-addition reading is 1.5". The test results verify the rationality of structural design and theoretical calculation model. 2020, Science Press. All right reserved. |
DOI | 10.3788/OPE.20202805.1075 |
URL | 查看原文 |
收录类别 | EI |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/64877 |
专题 | 中国科学院长春光学精密机械与物理研究所 |
推荐引用方式 GB/T 7714 | F.-N. Yu and S.-Y. Xu. Shafting design for precise two-dimensional turntable applied to 300 mm plane mirror[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2020,28(5):1075-1082. |
APA | F.-N. Yu and S.-Y. Xu.(2020).Shafting design for precise two-dimensional turntable applied to 300 mm plane mirror.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,28(5),1075-1082. |
MLA | F.-N. Yu and S.-Y. Xu."Shafting design for precise two-dimensional turntable applied to 300 mm plane mirror".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 28.5(2020):1075-1082. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Shafting design for (5108KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
谷歌学术 |
谷歌学术中相似的文章 |
[F.-N. Yu and S.-Y. Xu]的文章 |
百度学术 |
百度学术中相似的文章 |
[F.-N. Yu and S.-Y. Xu]的文章 |
必应学术 |
必应学术中相似的文章 |
[F.-N. Yu and S.-Y. Xu]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论