Design and Fabrication of Color Conversion Layer Based on InP/ZnS Core-shell Quantum Dots

doi:10.3788/fgxb20204105.0592

CIOMP OpenIR

	Design and Fabrication of Color Conversion Layer Based on InP/ZnS Core-shell Quantum Dots
	J.-X. Wang,J. Tao,J.-G. Lyu,Y. Li,Y.-Z. Zhao,P.-Y. Li,Y.-X. Qin,Y. Zhang,Z.-D. Hao,W.-B. Wang and J.-Q. Liang
	2020
发表期刊	Faguang Xuebao/Chinese Journal of Luminescence
ISSN	10007032
卷号	41 期号:5 页码:592-602
摘要	In this paper, we propose a technical route to prepare full-color display device based on blue Micro-LED array and environmental friendly InP/ZnS quantum dots. We design the new structure of full-color Micro-LED display device. We design and prepare InP/ZnS quantum dots color conversion layer which matches the blue Micro-LED array. In our new structure of full-color Micro-LED device, InP/ZnS quantum dots color conversion layer is inverted and has no direct touch with the blue Micro-LED array which can relieve the adverse effect on the PL characteristic of InP/ZnS quantum dots material. In order to prepare quantum dots layer with uniform film and uniform luminescence, flexible PDMS polymer layer is embedded into the substrate of the color conversion layer to eliminate coffee-ring effect. At the same time, the patterned 500 nm longwave filter film embedded into the substrate of the color conversion layer can suppress blue light emission which can improve the color purity of the InP/ZnS quantum dot pixel luminescence unit. Finally, a 1616 InP/ZnS quantum dots color conversion layer with a pixel pitch of 90 m was prepared experimentally. Based on the design and preparation method, the full-color Micro-LED device can be prepared with lower cost and higher efficiency. 2020, Science Press. All right reserved.
DOI	10.3788/fgxb20204105.0592
URL	查看原文
收录类别	EI
引用统计
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/64405
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	J.-X. Wang,J. Tao,J.-G. Lyu,Y. Li,Y.-Z. Zhao,P.-Y. Li,Y.-X. Qin,Y. Zhang,Z.-D. Hao,W.-B. Wang and J.-Q. Liang. Design and Fabrication of Color Conversion Layer Based on InP/ZnS Core-shell Quantum Dots[J]. Faguang Xuebao/Chinese Journal of Luminescence,2020,41(5):592-602.
APA	J.-X. Wang,J. Tao,J.-G. Lyu,Y. Li,Y.-Z. Zhao,P.-Y. Li,Y.-X. Qin,Y. Zhang,Z.-D. Hao,W.-B. Wang and J.-Q. Liang.(2020).Design and Fabrication of Color Conversion Layer Based on InP/ZnS Core-shell Quantum Dots.Faguang Xuebao/Chinese Journal of Luminescence,41(5),592-602.
MLA	J.-X. Wang,J. Tao,J.-G. Lyu,Y. Li,Y.-Z. Zhao,P.-Y. Li,Y.-X. Qin,Y. Zhang,Z.-D. Hao,W.-B. Wang and J.-Q. Liang."Design and Fabrication of Color Conversion Layer Based on InP/ZnS Core-shell Quantum Dots".Faguang Xuebao/Chinese Journal of Luminescence 41.5(2020):592-602.

条目包含的文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Design and Fabricati（2718KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览请求全文