CIOMP OpenIR  > 中科院长春光机所知识产出
Active correction of 1.23 m SiC mirror using bending mode
Zhu, Y.; T. Chen; J.-L. Wang; H.-Z. Li and X.-X. Wu
2017
Source PublicationGuangxue Jingmi Gongcheng/Optics and Precision Engineering
Volume25Issue:10
AbstractAs active correction of a large aperture SiC mirror with high stiffness is vulnerable to many calculation errors by direction least square method or free resonance method, this paper proposes a primary surface correction algorithm using bending mode to calculate and optimize the active force and to improve the correction capability. Firstly, a series of mathematical transformations were performed on the influence matrix of the primary mirror, and a set of orthogonal bending modes of primary mirror were obtained. Then, correction targets were fitted in bending modes to calculate the correction force. An 1.23 m SiC mirror and a support system were modeled by finite element analysis and the algorithm was verified by simulation experiments. Moreover, an active support system for the 1.23 m SiC mirror was set up to correct primary surface and a further optimization for the algorithm was conducted based on this system. The experiments show that the surface error is corrected from 0.23 RMS to 0.048 RMS by the proposed bending mode. Results of analysis and experiment demonstrate that the algorithm by bending mode efficiently reduces active force ranges and improves correction capability. It is significant for the active correction of large aperture SiC mirrors with high stiffness. 2017, Science Press. All right reserved.
Indexed Byei
Language中文
Document Type期刊论文
Identifierhttp://ir.ciomp.ac.cn/handle/181722/59503
Collection中科院长春光机所知识产出
Recommended Citation
GB/T 7714
Zhu, Y.,T. Chen,J.-L. Wang,et al. Active correction of 1.23 m SiC mirror using bending mode[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2017,25(10).
APA Zhu, Y.,T. Chen,J.-L. Wang,&H.-Z. Li and X.-X. Wu.(2017).Active correction of 1.23 m SiC mirror using bending mode.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,25(10).
MLA Zhu, Y.,et al."Active correction of 1.23 m SiC mirror using bending mode".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 25.10(2017).
Files in This Item: Download All
File Name/Size DocType Version Access License
Active correction of(1140KB)期刊论文作者接受稿开放获取CC BY-NC-SAView Download
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Zhu, Y.]'s Articles
[T. Chen]'s Articles
[J.-L. Wang]'s Articles
Baidu academic
Similar articles in Baidu academic
[Zhu, Y.]'s Articles
[T. Chen]'s Articles
[J.-L. Wang]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Zhu, Y.]'s Articles
[T. Chen]'s Articles
[J.-L. Wang]'s Articles
Terms of Use
No data!
Social Bookmark/Share
File name: Active correction of 1.23 m SiC mirror using bending mode.pdf
Format: Adobe PDF
This file does not support browsing at this time
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.