Fast generation of micro structured surface by applying PCD tools in micro turning

	Fast generation of micro structured surface by applying PCD tools in micro turning
	Zhang, J. G.; Q. S. Li; H. Zhang; Q. L. Cui; T. Cui; C. Ge; Z. Sun and D. F. Zhang
	2017
发表期刊	International Journal of Advanced Manufacturing Technology
卷号	90 期号:1
摘要	This paper studies the fast generation of micro structured surface by means of micro polycrystalline diamond (PCD) tools, which are manufactured by applying the wire cut electrical discharge machining (WEDM). Firstly, the fabrication of micro PCD tools is introduced in the WEDM process. Furthermore, by applying the micro cutting tools, the micro structures are directly fabricated on the alumina workpiece with just a simple micro turning process, which verifies the feasibility of the proposed microfabrication method. Following that, the tool wear in the micro turning process is also investigated. Although there is no considerable tool shape deterioration and tool edge damage, the adhesion of the workpiece material to the cutting edge is observed, which may cause the increase of cutting forces and the decrease of the machining accuracy. As following, a series of fundamental micro turning tests are conducted, and the influence of cutting conditions on the machined structure quality is investigated in detail. Finally, it is proposed that the micro/nano structures can also provide the self-cleaning properties due to the low surface energy. The proposed microfabrication process is expected to become a potential method for the fast generation of micro structured surface in the future.
收录类别	sci ; ei
语种	英语
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/59434
专题	中科院长春光机所知识产出
推荐引用方式 GB/T 7714	Zhang, J. G.,Q. S. Li,H. Zhang,et al. Fast generation of micro structured surface by applying PCD tools in micro turning[J]. International Journal of Advanced Manufacturing Technology,2017,90(1).
APA	Zhang, J. G..,Q. S. Li.,H. Zhang.,Q. L. Cui.,T. Cui.,...&Z. Sun and D. F. Zhang.(2017).Fast generation of micro structured surface by applying PCD tools in micro turning.International Journal of Advanced Manufacturing Technology,90(1).
MLA	Zhang, J. G.,et al."Fast generation of micro structured surface by applying PCD tools in micro turning".International Journal of Advanced Manufacturing Technology 90.1(2017).

条目包含的文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Fast generation of m（2603KB）	期刊论文	作者接受稿	开放获取	CC BY-NC-SA	浏览下载