CIOMP OpenIR  > 中科院长春光机所知识产出
Fast generation of micro structured surface by applying PCD tools in micro turning
Zhang, J. G.; Q. S. Li; H. Zhang; Q. L. Cui; T. Cui; C. Ge; Z. Sun and D. F. Zhang
2017
发表期刊International Journal of Advanced Manufacturing Technology
卷号90期号:1
摘要This paper studies the fast generation of micro structured surface by means of micro polycrystalline diamond (PCD) tools, which are manufactured by applying the wire cut electrical discharge machining (WEDM). Firstly, the fabrication of micro PCD tools is introduced in the WEDM process. Furthermore, by applying the micro cutting tools, the micro structures are directly fabricated on the alumina workpiece with just a simple micro turning process, which verifies the feasibility of the proposed microfabrication method. Following that, the tool wear in the micro turning process is also investigated. Although there is no considerable tool shape deterioration and tool edge damage, the adhesion of the workpiece material to the cutting edge is observed, which may cause the increase of cutting forces and the decrease of the machining accuracy. As following, a series of fundamental micro turning tests are conducted, and the influence of cutting conditions on the machined structure quality is investigated in detail. Finally, it is proposed that the micro/nano structures can also provide the self-cleaning properties due to the low surface energy. The proposed microfabrication process is expected to become a potential method for the fast generation of micro structured surface in the future.
收录类别sci ; ei
语种英语
文献类型期刊论文
条目标识符http://ir.ciomp.ac.cn/handle/181722/59434
专题中科院长春光机所知识产出
推荐引用方式
GB/T 7714
Zhang, J. G.,Q. S. Li,H. Zhang,et al. Fast generation of micro structured surface by applying PCD tools in micro turning[J]. International Journal of Advanced Manufacturing Technology,2017,90(1).
APA Zhang, J. G..,Q. S. Li.,H. Zhang.,Q. L. Cui.,T. Cui.,...&Z. Sun and D. F. Zhang.(2017).Fast generation of micro structured surface by applying PCD tools in micro turning.International Journal of Advanced Manufacturing Technology,90(1).
MLA Zhang, J. G.,et al."Fast generation of micro structured surface by applying PCD tools in micro turning".International Journal of Advanced Manufacturing Technology 90.1(2017).
条目包含的文件 下载所有文件
文件名称/大小 文献类型 版本类型 开放类型 使用许可
Fast generation of m(2603KB)期刊论文作者接受稿开放获取CC BY-NC-SA浏览 下载
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Zhang, J. G.]的文章
[Q. S. Li]的文章
[H. Zhang]的文章
百度学术
百度学术中相似的文章
[Zhang, J. G.]的文章
[Q. S. Li]的文章
[H. Zhang]的文章
必应学术
必应学术中相似的文章
[Zhang, J. G.]的文章
[Q. S. Li]的文章
[H. Zhang]的文章
相关权益政策
暂无数据
收藏/分享
文件名: Fast generation of micro structured.pdf
格式: Adobe PDF
此文件暂不支持浏览
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。