CIOMP OpenIR  > 中科院长春光机所知识产出
Support system study of rectangular mirror
Li, H.; Y. Ding and H. Zhang
2015
发表期刊Guangxue Xuebao/Acta Optica Sinica
卷号35期号:5
摘要Support system design for large size rectangular mirror is one of the most challenging technical points during development of off-axis three-mirror anastigmatism (TMA) optical imaging sensor. The rectangular third mirror with the size of 760 mm320 mm is the study object. Key mechanism of the temperature effect on the mirror's optical surface deformation is studied thoroughly. The relationships between temperature range and the mirror blank's and back support part's linear expansion coefficient difference, mirror blank's capacity on interface mechanical load, rigidity of the flex structure which connects mirror blank and back support part, are established. During development of the mirror support system, a two-axis flex support structure which is composed of two perpendicular single axis circular flexures is proposed, and finite element analysis (FEA) is also employed to evaluate the mirror's optical surface error and model frequency of this mirror sub-assembly. In the mean time, sine scan test is used to verify the FEA result of mirror sub-assembly's model frequency. Under combination of 1g self gravity load and 10 temperature variation, the maximum FEA value of the mirror optical surface root-meansquare(RMS) error is 13.4 nm, and it meets the proposed requirement /45 (=632 nm). FEA result and test value of the lowest model frequency of the mirror sub-assembly are 128.67 Hz and 124.1 Hz, respectively, it is higher than the proposed requirement of 100 Hz and meets design objective. , 2015, Chinese Optical Society. All right reserved.
文章类型期刊论文
收录类别EI
文献类型期刊论文
条目标识符http://ir.ciomp.ac.cn/handle/181722/56168
专题中科院长春光机所知识产出
推荐引用方式
GB/T 7714
Li, H.,Y. Ding and H. Zhang. Support system study of rectangular mirror[J]. Guangxue Xuebao/Acta Optica Sinica,2015,35(5).
APA Li, H.,&Y. Ding and H. Zhang.(2015).Support system study of rectangular mirror.Guangxue Xuebao/Acta Optica Sinica,35(5).
MLA Li, H.,et al."Support system study of rectangular mirror".Guangxue Xuebao/Acta Optica Sinica 35.5(2015).
条目包含的文件 下载所有文件
文件名称/大小 文献类型 版本类型 开放类型 使用许可
矩形反射镜结构支撑技术研究.caj(1805KB)期刊论文作者接受稿开放获取CC BY-NC-SA浏览 下载
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Li, H.]的文章
[Y. Ding and H. Zhang]的文章
百度学术
百度学术中相似的文章
[Li, H.]的文章
[Y. Ding and H. Zhang]的文章
必应学术
必应学术中相似的文章
[Li, H.]的文章
[Y. Ding and H. Zhang]的文章
相关权益政策
暂无数据
收藏/分享
文件名: 矩形反射镜结构支撑技术研究.caj
格式: caj
此文件暂不支持浏览
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。