Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Design and alignment of support structure for off-axis multi-mirror system | |
Mei, G.; Y. Zhai; J.-Y. Miao and Q.-S. Pu | |
2015 | |
发表期刊 | Guangxue Jingmi Gongcheng/Optics and Precision Engineering |
卷号 | 23期号:8页码:2280-2287 |
摘要 | A support structure with an adhesive truss was designed for a space camera with off-axis multi-mirror systems. The struts of this truss were manufactured with T700 made of carbon fiber composites, fittings were manufactured with titanium alloys, the adhesive was J133 epoxy resin and casting titanium fittings were bonded on both ends of the truss struts to provide interfaces for other subassemblies of the camera. The methods and steps for assist alignment equipment and gluing the subassemblies were described particularly. Firstly, preliminary assembly and alignment were done to ensure the precise locations of struts and fittings using the assistance equipment. Then, the formal alignment was performed with the help of locating pins, and the struts and fittings were restored in the correct initial positions and bonded with adhesives. Finally, the structure was solidified at room temperature for 5-7 days, and the assembly and alignment were finished after dismantling the assistance equipment and pins. The results of finite element analysis and vibration test indicate that the first-order natural frequencies of the truss and the lens supported by the truss are more than 90 Hz and 70Hz, respectively. Interfaces of mirror subassemblies were measured before and after vibration tests, and the results show that the flatness has been reached to 0.15 mm and the maximum relative error of interface flatness is 5.3%. The conclusion is that the stiffness and dimensional stability of the truss well meet the design requirements. , 2015, Chinese Academy of Sciences. All right reserved. |
文章类型 | 期刊论文 |
收录类别 | EI |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/56074 |
专题 | 中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Mei, G.,Y. Zhai,J.-Y. Miao and Q.-S. Pu. Design and alignment of support structure for off-axis multi-mirror system[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2015,23(8):2280-2287. |
APA | Mei, G.,Y. Zhai,&J.-Y. Miao and Q.-S. Pu.(2015).Design and alignment of support structure for off-axis multi-mirror system.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,23(8),2280-2287. |
MLA | Mei, G.,et al."Design and alignment of support structure for off-axis multi-mirror system".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 23.8(2015):2280-2287. |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
离轴多反射镜系统支撑结构的设计与装调.c(373KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | 浏览 请求全文 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论