Precision temperature control for supporting trusses of lightweight space cameras

	Precision temperature control for supporting trusses of lightweight space cameras
	Kong L.; Wang D.; Yao J.-S.; Jin G.; Li Z.-X.
	2014
发表期刊	Guangxue Jingmi Gongcheng/Optics and Precision Engineering
ISSN	ISBN/1004924X
卷号	22 期号:3 页码:712-719
摘要	As the changed temperature of truss structure in a long focus camera will effect the image quality of an optical system, this paper explores the thermal design of supporting truss of the camera. First, the absorbed heat flux and heating powers of a truss rod were analyzed based on the temperature limit requirement of the optical system and the orbital parameters of the satellite. According to the analysis of thermal balance equation, it points out that the temperature difference of the truss is mainly determined by the heating power and arrangement of the heaters. Then, through the theoretical analysis of a simplified mathematical model of the truss, the temperature difference equation of supporting truss was derived, and two thermal control methods including increasing heater areas or increasing the effective thermal conductivity of the truss were presented. A new kind of material named Pyrolytic Graphite Sheet (PGS) was proved to be a candidate that can well satisfy the design requirements of increasing thermal conductivity and lighting the weight of supporting truss. On the calculation, it shows that the temperature difference has decreased from 7.9C to 0.83C with the mass of each truss increasing only 12 g by using 0.076 mm thick PGS. Finally, through the thermal vacuum test and temperature difference measurement test, it demonstrates that the analysis and simulation is valid and the PGS can withstand vacuum and temperature changes under the test conditions. The method presented in this paper is practical and effective.
收录类别	EI
语种	中文
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/44283
专题	中科院长春光机所知识产出
推荐引用方式 GB/T 7714	Kong L.,Wang D.,Yao J.-S.,et al. Precision temperature control for supporting trusses of lightweight space cameras[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2014,22(3):712-719.
APA	Kong L.,Wang D.,Yao J.-S.,Jin G.,&Li Z.-X..(2014).Precision temperature control for supporting trusses of lightweight space cameras.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,22(3),712-719.
MLA	Kong L.,et al."Precision temperature control for supporting trusses of lightweight space cameras".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 22.3(2014):712-719.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
轻型空间相机支撑桁架的精确控温_孔林.c（561KB）			开放获取	CC BY-ND	浏览下载