Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Effect of period setting value on printed phase in scanning beam interference lithography system | |
Jiang S.; Bayanheshig; Li W.; Song Y.; Pan M. | |
2014 | |
发表期刊 | Guangxue Xuebao/Acta Optica Sinica |
ISSN | ISBN/02532239 |
卷号 | 34期号:9 |
摘要 | Interference fringe period is a very important parameter of phase locking in scanning beam interference lithography system. The deviation between period setting value and nominal fringe period value will cause stitching error of interference fringe between adjoining scans. To get features of scanning lithography manufactured grating diffraction wavefront, according to the characteristics of step-and-scanning lithography and working principle of dynamic phase locking, the mathematical model of scanning beam interference lithography is built. According to this model, variations of printed error and lithography grating period are given. Experiments are done to verify this model. Results show that period setting error in phase locking system will cause periodic printed error. Periods of lithography grating vary with period settings. Lithography grating period is equal to period setting value with tiny period setting error. When interference beam waist radius is 0.9 mm, step over distance is 0.6 mm and fringe period is 555.6 nm, periodic printed error is less than 1 nm with period setting relative error less than 27810-6. If the dose contrast is more than 0.9, period setting error must be controlled within 92.610-6. The variable range of period setting value and lithography grating period is 102.8 pm. |
收录类别 | EI |
语种 | 中文 |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/43933 |
专题 | 中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Jiang S.,Bayanheshig,Li W.,et al. Effect of period setting value on printed phase in scanning beam interference lithography system[J]. Guangxue Xuebao/Acta Optica Sinica,2014,34(9). |
APA | Jiang S.,Bayanheshig,Li W.,Song Y.,&Pan M..(2014).Effect of period setting value on printed phase in scanning beam interference lithography system.Guangxue Xuebao/Acta Optica Sinica,34(9). |
MLA | Jiang S.,et al."Effect of period setting value on printed phase in scanning beam interference lithography system".Guangxue Xuebao/Acta Optica Sinica 34.9(2014). |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
扫描干涉场曝光系统中周期设定对曝光刻线相(447KB) | 开放获取 | CC BY-ND | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论