Dual-rotor tool path generation and removal error analysis in active feed polishing

	Dual-rotor tool path generation and removal error analysis in active feed polishing
	Wang S.; Liu J.; Zhang L.
	2013
发表期刊	Applied Optics
ISSN	ISBN/00036935
卷号	52 期号:28
摘要	High-quality ultrasmooth surface is needed in modern optics, while the existing ultrasmooth surface processing methods are difficult to meet the requirement of the surface figure. In order to solve this problem, the active feed polishing (AFP) is taken as the research object, and the dual-rotor tool path is put forward for this technology. This tool path is generated based on the motion synthesis principle, which realizes smooth connection between different sections. At the same time, the eccentricity, the speed ratio, the velocity, and other parameters can be modified easily, avoiding using the complicated dual-rotor polishing mechanism. In order to further analyze the removal error, the removal amount calculation method for the dual-rotor path is researched and proposed. The simulation analysis results show that the greatest influence factor for the removal error is the sampling interval, the influence of the eccentricity and the speed ratio is less, and the velocity has little impact on it. In addition, the removal error can be controlled within acceptable range by reasonable selection of process parameters. Finally, through a processing experiment of a 100 mm plane lens, the feasibility and effectiveness of this path is verified. This experimental result shows that the AFP technology using the dual-rotor tool path can effectively correct the surface shape while reducing the surface roughness. 2013 Optical Society of America.
收录类别	SCI ; EI
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/40619
专题	中科院长春光机所知识产出
推荐引用方式 GB/T 7714	Wang S.,Liu J.,Zhang L.. Dual-rotor tool path generation and removal error analysis in active feed polishing[J]. Applied Optics,2013,52(28).
APA	Wang S.,Liu J.,&Zhang L..(2013).Dual-rotor tool path generation and removal error analysis in active feed polishing.Applied Optics,52(28).
MLA	Wang S.,et al."Dual-rotor tool path generation and removal error analysis in active feed polishing".Applied Optics 52.28(2013).

条目包含的文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
ao-52-28-6948.pdf（1497KB）			开放获取	CC BY-NC-ND	浏览请求全文