中国科学院长春光学精密机械与物理研究所

QQ客服 官方微博 反馈留言

	Experimental study on the heat transfer performance of a vapour chamber with porous wick structures printed via metallic additive manufacturing
	X. Meng, S. Tan, Z. Yuan, Y. Zhang and L. Chen
	2023
发表期刊	International Communications in Heat and Mass Transfer
ISSN	07351933
卷号	140
摘要	Two types of vapour chamber with integrated three-dimensionally (3D) printed wicks, namely a single-pore 3D printed wick vapour chamber and hybrid-pore 3D printed wick vapour chamber, were designed, printed, and tested to demonstrate the feasibility of constructing VCs through metallic additive manufacturing. A water-cooling test system was established to study the temperature distribution, thermal resistance, and maximum heat transfer power of the VCs. The effects of the cooling-water temperature, heat source area, and hybrid-pore wick structure on the heat transfer performance of the VCs were explored. The results show that the vapour chamber with a 3D printed wick had efficient heat transfer in the range of 0–100 W. The cooling-water temperature greatly affected the heat transfer performance of the VCs. The 3D printed hybrid-pore wick improved the temperature uniformity and heat transfer of the VC. When P = 100 W, the thermal resistance of the hybrid-pore 3D printed wick vapour chamber was 0.077 °C/W at a cooling-water temperature Tw = 40 °C. The test results indicate that the application of Additive Manufacturing (AM) in fabricating high-performance VCs is feasible and provides more freedom in terms of customizing the heat transfer performance and integrating with the structural design of the heat source. © 2022 Elsevier Ltd
DOI	10.1016/j.icheatmasstransfer.2022.106496
URL	查看原文
收录类别	ei
引用统计
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/67768
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	X. Meng, S. Tan, Z. Yuan, Y. Zhang and L. Chen. Experimental study on the heat transfer performance of a vapour chamber with porous wick structures printed via metallic additive manufacturing[J]. International Communications in Heat and Mass Transfer,2023,140.
APA	X. Meng, S. Tan, Z. Yuan, Y. Zhang and L. Chen.(2023).Experimental study on the heat transfer performance of a vapour chamber with porous wick structures printed via metallic additive manufacturing.International Communications in Heat and Mass Transfer,140.
MLA	X. Meng, S. Tan, Z. Yuan, Y. Zhang and L. Chen."Experimental study on the heat transfer performance of a vapour chamber with porous wick structures printed via metallic additive manufacturing".International Communications in Heat and Mass Transfer 140(2023).

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Experimental study o（3645KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览 下载

个性服务

推荐该条目

保存到收藏夹

查看访问统计

导出为Endnote文件

谷歌学术

谷歌学术中相似的文章

[X. Meng, S. Tan, Z. Yuan, Y. Zhang and L. Chen]的文章

百度学术

百度学术中相似的文章

[X. Meng, S. Tan, Z. Yuan, Y. Zhang and L. Chen]的文章

必应学术

必应学术中相似的文章

[X. Meng, S. Tan, Z. Yuan, Y. Zhang and L. Chen]的文章

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。