Topology and Size Optimized Design and Laser Welding of the U-Frame for Free-Space Laser Communication Telescopes

doi:10.3390/machines11090868

CIOMP OpenIR

	Topology and Size Optimized Design and Laser Welding of the U-Frame for Free-Space Laser Communication Telescopes
	G. Z. Li; Z. W. Huo; J. Yuan; L. Y. Tan; L. Zhang and J. Li
	2023
发表期刊	Machines
卷号	11 期号:9 页码:15
摘要	The success of laser communications heavily relies on the stiffness, dynamic properties, static performance, and manufacturability of the U-frame. The U-frame is a fundamental element in satellite-to-ground laser communication telescopes. However, there is currently a lack of research on the optimal design of U-frames, leading to a significant gap between ideal construction and practical manufacturability. To address these concerns, this study proposes a comprehensive approach that combines multi-objective topology optimization and multi-start size optimization techniques. This approach considers the multidisciplinary constraints imposed by mechanical, control, and optical systems. The objective is to achieve both the conceptual and detailed design of a novel U-frame, while also ensuring thorough consideration of the structure's manufacturability during the optimization process. The prototype of the optimized U-frame was successfully fabricated using laser welding processes. The tensile test conducted on the prototype supported the idea that laser welding can enhance the micro-grain size of the joint, leading to improved overall mechanical properties. In particular, the joint strength achieved through laser welding was found to be 1.5 times greater than that achieved through TIG (Tungsten Inert Gas) welding. Additionally, the results obtained from the free vibration experiment closely aligned with the simulation, confirming the feasibility of manufacturing the optimized structure. The optimized structure demonstrated an improvement of 7.13% in dynamic performance and 29.61% in static performance compared to the first-generation structure. Additionally, there was a reduction of 29.89% in mass without affecting the remaining performance aspects. The successful fabrication of the prototype validates the feasibility of the proposed welding process and highlights the superiority of the new U-frame.
DOI	10.3390/machines11090868
URL	查看原文
收录类别	sci
语种	英语
引用统计
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/67606
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	G. Z. Li,Z. W. Huo,J. Yuan,et al. Topology and Size Optimized Design and Laser Welding of the U-Frame for Free-Space Laser Communication Telescopes[J]. Machines,2023,11(9):15.
APA	G. Z. Li,Z. W. Huo,J. Yuan,L. Y. Tan,&L. Zhang and J. Li.(2023).Topology and Size Optimized Design and Laser Welding of the U-Frame for Free-Space Laser Communication Telescopes.Machines,11(9),15.
MLA	G. Z. Li,et al."Topology and Size Optimized Design and Laser Welding of the U-Frame for Free-Space Laser Communication Telescopes".Machines 11.9(2023):15.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Topology and Size Op（16117KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载