Stiffness Analysis and Verification of Hydraulic Supporting Units for In-Situ Optical Testing of a 500 mm-Diameter Mirror

doi:10.3390/machines10100828

CIOMP OpenIR

	Stiffness Analysis and Verification of Hydraulic Supporting Units for In-Situ Optical Testing of a 500 mm-Diameter Mirror
	D. Y. Dong; D. Zhou; Y. H. Jiang; L. Q. Wang; C. Li; H. F. Hu; Y. J. Guan and M. H. Gao
	2022
发表期刊	Machines
卷号	10 期号:10 页码:12
摘要	A hydraulic in-situ support system is commonly used in the optical testing of mirrors, since it is convenient to unload the gravity of a mirror to be measured without the risk of being turned over or moved to another place. The existing supporting structures have several disadvantages, such as the problem of the output force deviating from the axis, being sensitive to machining loads, its flexible components easily leading to fatigue damage by cyclic loads and so on. A new single-cylinder hydraulic supporting unit with a ball hinge was proposed, analyzed and verified in this paper. A finite simulation based on four structural parameters' effect on the stiffness of the proposed hydraulic supporting unit showed that increasing the thickness, elastic modulus and convolution width of the rolling diaphragm and decreasing the height of the rolling diaphragm to some extent was beneficial to a high stiffness. Moreover, it could be concluded from experiments that, in order to decrease the stiffness dispersion, the air ratio should be as low as possible and the values of the initial pressure and press speed should be as high as possible. These results are conducive to maintain a high stiffness of HSU to bear the processing load and reduce the low-order aberrations of mirror which provide a reference for future hydraulic supporting unit designs.
DOI	10.3390/machines10100828
URL	查看原文
收录类别	sci
语种	英语
引用统计
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/67112
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	D. Y. Dong,D. Zhou,Y. H. Jiang,et al. Stiffness Analysis and Verification of Hydraulic Supporting Units for In-Situ Optical Testing of a 500 mm-Diameter Mirror[J]. Machines,2022,10(10):12.
APA	D. Y. Dong.,D. Zhou.,Y. H. Jiang.,L. Q. Wang.,C. Li.,...&Y. J. Guan and M. H. Gao.(2022).Stiffness Analysis and Verification of Hydraulic Supporting Units for In-Situ Optical Testing of a 500 mm-Diameter Mirror.Machines,10(10),12.
MLA	D. Y. Dong,et al."Stiffness Analysis and Verification of Hydraulic Supporting Units for In-Situ Optical Testing of a 500 mm-Diameter Mirror".Machines 10.10(2022):12.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Stiffness Analysis a（3506KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载