Laser additive manufacturing of Inconel 718 at increased deposition rates

doi:10.1016/j.msea.2022.143196

CIOMP OpenIR

	Laser additive manufacturing of Inconel 718 at increased deposition rates
	C. L. Zhong; A. Gasser; G. Backes; J. B. Fu and J. H. Schleifenbaum
	2022
发表期刊	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
ISSN	0921-5093
卷号	844 页码:8
摘要	Inconel 718 (IN718) is a nickel-based superalloy designed to display exceptionally high yield, tensile and creep rupture properties at temperatures up to approx. 700 C. For aerospace applications, it is the most widely used superalloy. The additive manufacturing process, laser-based direct energy deposition (DED) with powdery filler material can be used to repair, geometrically modify or manufacture components made of IN718. However, despite the devious advantages, its typical deposition rate of < 0.5 kg/h is significantly lower than that of other DED processes such as metal inert gas (MIG) of wire + arc additive manufacturing (WAAM) - at about 10 kg/h - and electron beam additive manufacturing (EBAM (R)) with wire at approx. 12 kg/h. Here, using IN718 as additive material, we targeted to increase the deposition rate of laser-based DED by a factor of more than ten and achieved a deposition rate of about 6 kg/h. For this purpose, we first developed a suitable process management strategy in combination with adapted system technology. Then, we built up samples with developed process parameters, from which tensile specimens for mechanical property tests were manufactured. Thereafter, the macro-and microstructures of the as-deposited material were analyzed. Based on the results, we applied a post heat treatment for modifying the microstructure and improving the mechanical properties. We demonstrated finally, the aerospace material specifications for the static mechanical properties can be achieved. This work shows a great potential of laser-based DED with increased deposition rate.
DOI	10.1016/j.msea.2022.143196
URL	查看原文
收录类别	sci ; ei
语种	英语
引用统计
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/66789
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	C. L. Zhong,A. Gasser,G. Backes,et al. Laser additive manufacturing of Inconel 718 at increased deposition rates[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2022,844:8.
APA	C. L. Zhong,A. Gasser,G. Backes,&J. B. Fu and J. H. Schleifenbaum.(2022).Laser additive manufacturing of Inconel 718 at increased deposition rates.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,844,8.
MLA	C. L. Zhong,et al."Laser additive manufacturing of Inconel 718 at increased deposition rates".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 844(2022):8.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Laser additive manuf（7471KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载