中国科学院长春光学精密机械与物理研究所

QQ客服 官方微博 反馈留言

	Hydrogen Tetrachloroaurate-Modulated PEDOT:PSS film assembled with conductive NPB buffer layer for High-Performance planar perovskite solar cells
	Y. S. Sun; S. Yang; Z. Y. Pang; S. H. Chi; X. X. Sun; L. Fan; F. Y. Wang; X. Y. Liu; M. B. Wei; L. L. Yang and J. H. Yang
	2022
发表期刊	Chemical Engineering Journal
ISSN	1385-8947
卷号	432页码:11
摘要	The further improvements in optoelectronic properties, hydrophobicity of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) hole transport layers, as well as regulation of defect states within devices are essential to promote the continued development of inverted p-i-n rigid and flexible planar perovskite solar cells (PSCs). However, the strong hygroscopicity, poor surface morphology, lower work function and coil configuration of pristine PEDOT:PSS films are detrimental to their own performance and growth dynamics process of perovskites, often resulting in sever energy losses and poor device performance. Herein, hydrogen tetrachloroaurate (III) hydrate (HAuCl4.3H(2)O) additive is combined with a conductive N,N'-Bis-(1-naphthalenyl)-N,N'-bis-phenyl-(1,1 & PRIME;-biphenyl)-4,4 & PRIME;-diamine (NPB) buffer layer to boost device performance by systematically modulating PEDOT:PSS and perovskite film. Wherein, the redox reaction between PEDOT:PSS and HAuCl4 can cause phase segregation of PEDOT:PSS, improving the hydrophobicity, electrical conductivity, work function and surface morphology of the films. The reduced gold nanoparticles will produce localized surface plasmon resonance effects, thus enhancing the utilization of solar radiation by perovskite films. Furthermore, the suitable energy level alignment of NPB layer relative to perovskite and Au@PEDOT:PSS films will sufficiently exploit the dissociative excitons to facilitate effective hole transport, and the N atoms in NPB can also passivate defects at the interface by binding to uncoordinated Pb2+ ions, thereby reducing non-radiative open-circuit voltage loss and increasing short-circuit current density. A high power conversion efficiency (PCE) of 19.20% can be achieved for MA(0.85)FA(0.15)PbI(3) based p-i-n PSCs with negligible hysteresis and enhanced stability of devices. Similarly, the corresponding flexible device achieves a PCE of 14.04% with improved crumpling durability throughout low temperature preparation conditions below 140 ?degrees C. Our work presents a facile method to prepare high-efficient inverted PSCs while achieving improved long-term device stability.
DOI	10.1016/j.cej.2021.134358
URL	查看原文
收录类别	sci ; ei
语种	英语
引用统计
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/66740
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	Y. S. Sun,S. Yang,Z. Y. Pang,et al. Hydrogen Tetrachloroaurate-Modulated PEDOT:PSS film assembled with conductive NPB buffer layer for High-Performance planar perovskite solar cells[J]. Chemical Engineering Journal,2022,432:11.
APA	Y. S. Sun.,S. Yang.,Z. Y. Pang.,S. H. Chi.,X. X. Sun.,...&L. L. Yang and J. H. Yang.(2022).Hydrogen Tetrachloroaurate-Modulated PEDOT:PSS film assembled with conductive NPB buffer layer for High-Performance planar perovskite solar cells.Chemical Engineering Journal,432,11.
MLA	Y. S. Sun,et al."Hydrogen Tetrachloroaurate-Modulated PEDOT:PSS film assembled with conductive NPB buffer layer for High-Performance planar perovskite solar cells".Chemical Engineering Journal 432(2022):11.

条目包含的文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Hydrogen Tetrachloro（11620KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览 请求全文

个性服务

推荐该条目

保存到收藏夹

查看访问统计

导出为Endnote文件

谷歌学术

谷歌学术中相似的文章

[Y. S. Sun]的文章

[S. Yang]的文章

[Z. Y. Pang]的文章

百度学术

百度学术中相似的文章

[Y. S. Sun]的文章

[S. Yang]的文章

[Z. Y. Pang]的文章

必应学术

必应学术中相似的文章

[Y. S. Sun]的文章

[S. Yang]的文章

[Z. Y. Pang]的文章

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。