Research on the influence of ambient temperature on the performance of laser launching two-axis turntable

doi:10.3788/IRLA20200481

CIOMP OpenIR

	Research on the influence of ambient temperature on the performance of laser launching two-axis turntable
	X. Huang; G. Han and B. Li
	2021
发表期刊	Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering
ISSN	10072276
卷号	50 期号:10
摘要	The laser emission two-axis turntable is a device that takes the turntable as the main body, carrying the laser transmission and emission functions. The turntable is required to have good performance in the temperature range of 40-55 . To better understand the impact of ambient temperature on the performance of the turntable, the structure of the laser emitting two-axis turntable was introduced, and the finite element method was used to analyze and study the static and dynamic characteristics of the turntable under different ambient temperatures. The effect of the ambient temperature on the accuracy of the shafting was obtained from the result of the deformation of the turntable after the static analysis. According to the analysis, under the condition of 22 turntable performance parameters as the benchmark, within the temperature index range, at room temperature 22 , the static characteristics of the turntable and the shafting accuracy were the best. The farther the ambient temperature deviated from 22 , the worse the static characteristics and shafting accuracy. When the temperature changed by 10 , the maximum deformation of the turntable changed by about 0.529 mm, and the maximum stress value changed by about 18.418 MPa; the verticality error between the azimuth axis and the pitch axis changed by about 4.715, and the verticality error between the azimuth axis and the base support surface changed about 4.649; Azimuth shaft system wobble error changed about 0.22, pitch shaft system wobble error: (1) The temperature was below 22 , the change was about 0.33; (2) The temperature was above 22 , the change was about 0.569. When changing with temperature, the first 6 modal frequencies of the turntable had different laws, but the frequency change rate did not exceed 2%. The analysis results show that the ambient temperature has a greater impact on the static characteristics and shafting accuracy of this type of turntable, but has a small impact on the dynamic characteristics. The conclusion is consistent with engineering experience. 2021, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.
DOI	10.3788/IRLA20200481
URL	查看原文
收录类别	EI
引用统计
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/65593
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	X. Huang,G. Han and B. Li. Research on the influence of ambient temperature on the performance of laser launching two-axis turntable[J]. Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,2021,50(10).
APA	X. Huang,&G. Han and B. Li.(2021).Research on the influence of ambient temperature on the performance of laser launching two-axis turntable.Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,50(10).
MLA	X. Huang,et al."Research on the influence of ambient temperature on the performance of laser launching two-axis turntable".Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering 50.10(2021).

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Research on the infl（1983KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载