Preferred Film Orientation to Achieve Stable and Efficient Sn-Pb Binary Perovskite Solar Cells

doi:10.1021/acsami.0c19014

CIOMP OpenIR

	Preferred Film Orientation to Achieve Stable and Efficient Sn-Pb Binary Perovskite Solar Cells
	Y. Sun; S. Yang; Z. Pang; Y. Quan; R. Song; Y. Chen; W. Qi; Y. Gao; F. Wang; X. Zhang; Y. Sun; J. Yang; L. Yang and F. Rosei
	2021
发表期刊	ACS Applied Materials and Interfaces
ISSN	19448244
卷号	13 期号:9 页码:10822-10836
摘要	The preferred orientation of crystalline films in hybrid perovskite materials is known to influence the performance of perovskite solar cells (PSCs). Although the preferred growth along the (112) directions has been reported to promote charge transport within the Pb-based polycrystalline perovskite films, the preferred orientation growth of this facet is still difficult to be achieved due to the higher formation energy compared with the (110) plane. Herein, Sn-Pb binary perovskite films with a well-controlled orientation along the (224) plane were achieved by introducing a simple ultrasonic treatment (UST) into the additive engineering fabricated method. UST is used to process the perovskite precursor solutions of tartaric acid (TA) modified Sn-Pb binary polycrystalline perovskite films to regulate the interactions between PbI2/SnI2 and TA in the intermediate phases. Meanwhile, TA-modulated MA0.9Cs0.1Pb0.75Sn0.25I3-based perovskite films with a preferred orientation of (224) crystal plane were obtained by precisely controlling the UST time to 15 min. The highest power conversion efficiency (PCE) of 15.59% with less hysteresis and improved stability was achieved, while realizing 8.64 and 25.32% enhancements of PCE compared with that of TA-based and control counterparts with (110) preferred orientation, respectively. Our work provides a promising route to obtain preferred orientation growth of polycrystalline perovskite films. In particular, we have shown that this approach improves the performance of Sn-Pb binary PSCs, while such methodology is quite flexible and could also be applied to other low-/non-toxic PSCs. 2021 American Chemical Society. All rights reserved.
DOI	10.1021/acsami.0c19014
URL	查看原文
收录类别	SCI ; EI
引用统计
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/65549
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	Y. Sun,S. Yang,Z. Pang,et al. Preferred Film Orientation to Achieve Stable and Efficient Sn-Pb Binary Perovskite Solar Cells[J]. ACS Applied Materials and Interfaces,2021,13(9):10822-10836.
APA	Y. Sun.,S. Yang.,Z. Pang.,Y. Quan.,R. Song.,...&L. Yang and F. Rosei.(2021).Preferred Film Orientation to Achieve Stable and Efficient Sn-Pb Binary Perovskite Solar Cells.ACS Applied Materials and Interfaces,13(9),10822-10836.
MLA	Y. Sun,et al."Preferred Film Orientation to Achieve Stable and Efficient Sn-Pb Binary Perovskite Solar Cells".ACS Applied Materials and Interfaces 13.9(2021):10822-10836.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Preferred Film Orien（9728KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载