Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Identification and compensation of friction for modular joints based on grey wolf optimizer | |
J.-K. Cui; H.-Y. Sai; E.-Y. Zhang; Z. M.-C and X. Z.-B | |
2021 | |
发表期刊 | Guangxue Jingmi Gongcheng/Optics and Precision Engineering
![]() |
ISSN | 1004924X |
卷号 | 29期号:11页码:2683-2691 |
摘要 | To identify the friction model parameters of a modular joint, an off-line identification method that compensates the joint friction is proposed. First, the structure and control system of the modular joint are presented, and the dynamic model of the joint is established. Second, the LuGre friction model is developed. The grey wolf algorithm and piecewise least-square algorithm with a pseudo random sequence are then used to identify the respective model parameters. The results of two methods are compared and analyzed, and a feed-forward compensation algorithm based on the LuGre friction model is designed and verified experimentally. The experimental results indicate that compared with the piecewise least-square method, the identification accuracy of the grey wolf algorithm improved by 19.2%; the joint velocity tracking error decreased from 0.295 ()/s to 0.183 ()/s when the given velocity signal was a sine wave with an amplitude of 1 ()/s and a frequency of 10 Hz; and the velocity loop bandwidth increased from 12 Hz to 18 Hz after friction compensation. Several experiments are repeated, and the identified data exhibit a high repeatability, which verifies the suitability of the proposed method. The proposed feed-forward friction compensation algorithm can be used to improve the dynamic performance of the joint control system. 2021, Science Press. All right reserved. |
DOI | 10.37188/OPE.20212911.2683 |
URL | 查看原文 |
收录类别 | EI |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/65309 |
专题 | 中国科学院长春光学精密机械与物理研究所 |
推荐引用方式 GB/T 7714 | J.-K. Cui,H.-Y. Sai,E.-Y. Zhang,et al. Identification and compensation of friction for modular joints based on grey wolf optimizer[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2021,29(11):2683-2691. |
APA | J.-K. Cui,H.-Y. Sai,E.-Y. Zhang,&Z. M.-C and X. Z.-B.(2021).Identification and compensation of friction for modular joints based on grey wolf optimizer.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,29(11),2683-2691. |
MLA | J.-K. Cui,et al."Identification and compensation of friction for modular joints based on grey wolf optimizer".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 29.11(2021):2683-2691. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Identification and c(1522KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论