A finite element analysis for improvement of shaping process of complex-shaped large-size silicon carbide mirrors

doi:10.3390/ma14154136

CIOMP OpenIR

	A finite element analysis for improvement of shaping process of complex-shaped large-size silicon carbide mirrors
	L. Qiao; J. Zhu; Y. Wan; C. Cui and G. Zhang
	2021
发表期刊	Materials
ISSN	19961944
卷号	14 期号:15
摘要	In the gel-casting process, the proper selection of technological parameters is crucial for the final quality of a green body. In this work, the finite element method is used to investigate the mold characteristics in the gel-casting process, and the typical flow behaviors under different conditions are presented. Based on the distribution characteristics of temperature, pressure and flow field of gel polymer, the simulated results provide some possible reasons for the generation mechanisms of defects. Then, a series of simulations were performed to investigate the effect of process parameters on the molding quality of green gel-cast bodies. The results show that the decreasing loading speed can effectively reduce the number of defects and improve the molding quality. In addition, this paper presents a new technique by applying the exhaust hole to decrease the number of defects and, hence, improve structural integrity. The influence of the loading speed on the mold characteristics is well understood for the gating system with an exhaust hole, which suggests to us appropriate parameters for optimizing the molding design. This work provides a theoretical basis to explicate the generating mechanism of defects involved in the gel-casting process and acquires an optimized technique to produce a silicon carbide green body. 2021 by the authors. Licensee MDPI, Basel, Switzerland.
DOI	10.3390/ma14154136
URL	查看原文
收录类别	SCI ; EI
引用统计
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/65255
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	L. Qiao,J. Zhu,Y. Wan,et al. A finite element analysis for improvement of shaping process of complex-shaped large-size silicon carbide mirrors[J]. Materials,2021,14(15).
APA	L. Qiao,J. Zhu,Y. Wan,&C. Cui and G. Zhang.(2021).A finite element analysis for improvement of shaping process of complex-shaped large-size silicon carbide mirrors.Materials,14(15).
MLA	L. Qiao,et al."A finite element analysis for improvement of shaping process of complex-shaped large-size silicon carbide mirrors".Materials 14.15(2021).

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
A finite element ana（2149KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载