Optimization and analysis of a primary mirror for a laser incoherent combining system

doi:10.3788/CO.2019-0161

CIOMP OpenIR

	Optimization and analysis of a primary mirror for a laser incoherent combining system
	W. Tang,L.-S. Liu,Y. Liu,J.-F. Shao and J. Guo
	2020
发表期刊	Chinese Optics
ISSN	20951531
卷号	13 期号:3 页码:442-450
摘要	A primary mirror for a high-power laser incoherent combining system was designed and analyzed. Firstly, the material and the thickness of the primary mirror, it's supporting way and it's lightweight scheme were determined through theoretical analysis. Then, the thermal deformation of the primary mirror was calculated by the finite element method, and the topology optimization was executed according to thermal deformation results. Finally, the impact of gravity, base frequency and ambient temperature on the P-V value of the primary mirror was analyzed. The calculation results show that the temperature rise T and the P-V value of the primary mirror gradually increase when irradiated by six lasers with a power of 10 kW over a greater amount of time. When laser irradiation time reaches 3 min, the temperature rise T and the P-V value of the unoptimized primary mirror are 83.4 and 155 nm respectively, resulting in thermal deformation values in the irradiated area that are inconsistently affecting by the structure. Its D-value was about 1/6 that of the primary mirror. After topology optimization, the lightweight rate of the primary mirror was 54.5%, the thermal deformation value in the laser-irradiated area was consistent, and the P-V value of the primary mirror reduced to 1/3. The gravity deformation value of the primary mirror at different pitching angles was basically the same and the maximum P-V value was less than 10 nm. The ambient temperature causes distortion and defocus aberration, and with an increase in ambient temperature, the aberration grows. Modal analysis shows that the base frequency of the primary mirror meets the system requirement. These conclusions have a referential value for high power laser incoherent combining systems. 2020, China Science Publishing & Media LTD. All right reserved.
DOI	10.3788/CO.2019-0161
URL	查看原文
收录类别	EI
引用统计
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/64762
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	W. Tang,L.-S. Liu,Y. Liu,J.-F. Shao and J. Guo. Optimization and analysis of a primary mirror for a laser incoherent combining system[J]. Chinese Optics,2020,13(3):442-450.
APA	W. Tang,L.-S. Liu,Y. Liu,J.-F. Shao and J. Guo.(2020).Optimization and analysis of a primary mirror for a laser incoherent combining system.Chinese Optics,13(3),442-450.
MLA	W. Tang,L.-S. Liu,Y. Liu,J.-F. Shao and J. Guo."Optimization and analysis of a primary mirror for a laser incoherent combining system".Chinese Optics 13.3(2020):442-450.

条目包含的文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Optimization and ana（2683KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览请求全文