Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Design of a Roll Angle Measuring Sensor | |
W. C. Yang,Z. Q. Wang,C. W. Shen,Y. S. Liu and S. J. Liu | |
2020 | |
发表期刊 | Ieee Access |
ISSN | 2169-3536 |
卷号 | 8页码:115159-115166 |
摘要 | Aiming at the measurement of roll deformation between two devices, we propose a novel scheme and elaborate the structure design in this paper. The scheme can realize the relative measurement of roll angle even if the system does not provide a reference datum, which effectively solves the problems of limited measurement range of moire fringes and accuracy guarantee only in an extremely small angle range. First, the principle of measuring the roll angle by moire fringes is introduced, and the effects of various error sources in the system are comprehensively considered. Then, the combined measurement scheme and the entire system composition structure are analyzed in detail. In addition, an experimental setup is designed to verify the accuracy of roll deformation measurement. The measurement results show that the root mean square (RMS) error can reach 6.9 '' within 3 degrees, and is less than 7.8 '' in the range of 0 degrees-90 degrees. Hence, our proposed scheme has a good measurement stability in a large roll range. |
DOI | 10.1109/access.2020.3004365 |
URL | 查看原文 |
收录类别 | SCI ; EI |
语种 | 英语 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/64419 |
专题 | 中国科学院长春光学精密机械与物理研究所 |
推荐引用方式 GB/T 7714 | W. C. Yang,Z. Q. Wang,C. W. Shen,Y. S. Liu and S. J. Liu. Design of a Roll Angle Measuring Sensor[J]. Ieee Access,2020,8:115159-115166. |
APA | W. C. Yang,Z. Q. Wang,C. W. Shen,Y. S. Liu and S. J. Liu.(2020).Design of a Roll Angle Measuring Sensor.Ieee Access,8,115159-115166. |
MLA | W. C. Yang,Z. Q. Wang,C. W. Shen,Y. S. Liu and S. J. Liu."Design of a Roll Angle Measuring Sensor".Ieee Access 8(2020):115159-115166. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Yang-2020-Design of (6706KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论