Design and fabrication of additively manufactured aluminum mirrors

doi:10.1117/1.Oe.59.1.013103

CIOMP OpenIR

	Design and fabrication of additively manufactured aluminum mirrors
	S. N. Tan,Y. L. Ding,Y. S. Xu and L. Shi
	2020
发表期刊	Optical Engineering (IF:1.113[JCR-2019],1.107[5-Year])
ISSN	0091-3286
卷号	59 期号:1 页码:17
摘要	To meet the increasing demand for practicality and rapidity of the optical components in aircraft folding optical systems, an aluminum mirror preparation method based on additive manufacturing (AM) technology is proposed. From the perspective of special processing technology for AM, a preparation process chain of additively manufactured mirrors is proposed to address limitations in the design process such as size, support, and connectivity constraints. First, the deposited mirror manufactured by AM technology is prepared. Second, the additively manufactured metal mirror is densified by the hot isostatic pressing process. Then, computer numerical control machining and single-point diamond turning is applied to realize the shape of the surface. Finally, the AM mirror is coated with the gold film. The experimental results show that the surface quality is 0.384 lambda (peak-to-valley method) and 0.093 lambda (root mean square method) (lambda = 632.8 nm), and the mirror surface roughness (Ra) is better than 8 nm. After the mirror is subjected to thermal cycles, the surface accuracy does not change significantly, which essentially meets the requirements of the aviation environment adaptability and shows good potential for application in the infrared band. (C) 2020 Society of Photo-Optical Instrumentation Engineers (SPIE)
DOI	10.1117/1.Oe.59.1.013103
URL	查看原文
收录类别	SCI ; EI
语种	英语
引用统计	正在获取...
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/64404
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	S. N. Tan,Y. L. Ding,Y. S. Xu and L. Shi. Design and fabrication of additively manufactured aluminum mirrors[J]. Optical Engineering,2020,59(1):17.
APA	S. N. Tan,Y. L. Ding,Y. S. Xu and L. Shi.(2020).Design and fabrication of additively manufactured aluminum mirrors.Optical Engineering,59(1),17.
MLA	S. N. Tan,Y. L. Ding,Y. S. Xu and L. Shi."Design and fabrication of additively manufactured aluminum mirrors".Optical Engineering 59.1(2020):17.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Tan-2020-Design and （7453KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载