Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Back support structure design of mirror of space remote sensor | |
K.Wang; J.Dong; P.Zhou; X.Wang; P.Jiang | |
2019 | |
发表期刊 | Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering |
ISSN | 10072276 |
卷号 | 48期号:7 |
摘要 | In view of the functional requirements of high surface shape error accuracy, high reliability and high stability of mirror support for space remote sensor, a three-point back support structure applied in the mirror support in the field of space was designed, the back support structure included taper sleeve, flexible segment and adjusting pad. The in-depth study was done about support principle and engineering realization of the three-point back support structure. The error source which caused the variation of surface shape error of the three-point back supporting mirror component was summarized, the theory of surface shape variation caused by various error sources was studied, and the corresponding design of the supporting structure was carried out to alleviate the variation of the surface shape error of the mirror caused by various error sources. Firstly, the static and dynamic simulation of the design results were carried out by means of finite element analysis, then the assembled and processed mirror assembly was tested. The results show that the surface shape error of mirror with the three-points support structure is better than /60 (=632.8 nm), the rigid body displacement of mirror is smaller than 0.01 mm, the dip angle is smaller than 2", the mass of the mirror component is smaller than 4.5 kg. The component has a reasonable distribution of modal, the fundamental frequency is 254 Hz, which is higher than the requirement of 120 Hz. The maximum magnification rate of the mirror assembly under sine vibration and random vibration is 1.73 times, and the maximum stress under sine vibration and random vibration is 369 MPa, far lower than the yield limit of the selected material. 2019, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved. |
关键词 | Mirrors,Errors,Ground supports,Mechanical testing,Remote sensing,Rigid structures |
DOI | 10.3788/IRLA201948.0718004 |
URL | 查看原文 |
收录类别 | EI |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/63007 |
专题 | 中国科学院长春光学精密机械与物理研究所 |
推荐引用方式 GB/T 7714 | K.Wang,J.Dong,P.Zhou,et al. Back support structure design of mirror of space remote sensor[J]. Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,2019,48(7). |
APA | K.Wang,J.Dong,P.Zhou,X.Wang,&P.Jiang.(2019).Back support structure design of mirror of space remote sensor.Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,48(7). |
MLA | K.Wang,et al."Back support structure design of mirror of space remote sensor".Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering 48.7(2019). |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Back support structu(4725KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
谷歌学术 |
谷歌学术中相似的文章 |
[K.Wang]的文章 |
[J.Dong]的文章 |
[P.Zhou]的文章 |
百度学术 |
百度学术中相似的文章 |
[K.Wang]的文章 |
[J.Dong]的文章 |
[P.Zhou]的文章 |
必应学术 |
必应学术中相似的文章 |
[K.Wang]的文章 |
[J.Dong]的文章 |
[P.Zhou]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论