Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Stiffness design of cantilevered structure with space optics load | |
Z.S.Wang; Q.F.Guo; F.Jiang; B.Chen; Q.W.Wu; G.Q.Wang | |
2019 | |
发表期刊 | Optik |
ISSN | 0030-4026 |
卷号 | 184页码:330-338 |
摘要 | Considering the low stiffness and strength for cantilever motor on the pitching shafting of a wide-angle aurora imager, a solution is proposed for setting up the motor-auxiliary-support, a stiffened plate, between the base and the motor. Firstly, the material, support position and structure form were determined. Secondly, the structural topology optimization was accomplished from the layout of stiffeners and the parameters of stiffeners by using the finite element simulation method. Then the structural design of the motor-auxiliary-support was determined. The simulation analysis and mechanical tests of the camera were carried out. It was found that the finite element analysis results were in agreement with the test results. After installed the motor-auxiliary-support, the frequency of the camera was increased by 14.58%, and the acceleration response of the sinusoidal vibration test on the motor was decreased by 79.32%. The structural ability to resist space mechanics environment had been improved significantly. The motor-auxiliary-support had a remarkable effect on improving the stiffness and strength of the structure. |
关键词 | Wide-angle aurora imager,Cantilever,Stiffness,Stiffened plate,Topological optimization,Finite element,shape optimization,stiffened plates,layout,Optics |
DOI | 10.1016/j.ijleo.2019.03.076 |
收录类别 | SCI ; EI |
语种 | 英语 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/62960 |
专题 | 中国科学院长春光学精密机械与物理研究所 |
推荐引用方式 GB/T 7714 | Z.S.Wang,Q.F.Guo,F.Jiang,et al. Stiffness design of cantilevered structure with space optics load[J]. Optik,2019,184:330-338. |
APA | Z.S.Wang,Q.F.Guo,F.Jiang,B.Chen,Q.W.Wu,&G.Q.Wang.(2019).Stiffness design of cantilevered structure with space optics load.Optik,184,330-338. |
MLA | Z.S.Wang,et al."Stiffness design of cantilevered structure with space optics load".Optik 184(2019):330-338. |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Stiffness design of (1390KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论