Structural design of primary mirror subassembly for spatial gravitational wave telescope

doi:10.3788/IRLA201847.0818004

CIOMP OpenIR

	Structural design of primary mirror subassembly for spatial gravitational wave telescope
	Li, Yupeng; Wang, Zhi; Sha, Wei; Wu, Qingwen; Zhao, Ya
	2018
发表期刊	Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering
ISSN	10072276
卷号	47 期号:8
摘要	Aiming at the extremely high optical path stability requirements of the spatial gravitational wave telescope in the order of picometer, the main mirror components in the system were optimized. Zerodur was chosen as the material of the primary mirror, the support structure was Invar. Firstly, through the optimization of the parameters of the mirror analysis, while ensuring the accuracy of the surface, the mirror light weight rate reached 72%. Then a biaxial joint Bipod flexible mirror support structure was designed, using the side of the three-point support form. In order to ensure the effective support stiffness and unloading effect, the mathematical model of the mechanism was established, and its size parameters were optimized based on Matlab. Finally, the modal analysis and vibration test of the primary mirror components were optimized, and the on-orbit analysis and wavefront quality calculation were completed. The results show that the first-order natural frequency of the primary mirror component is 373 Hz, and the relative error of the test result is 3.5%. The main mirror accuracy is 8.9 nm(RMS); wavefront accuracy is /5(=1 064 nm). The analysis results show that the reflector assembly meets the design requirements. 2018, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.
关键词	Optical testing Gravitational effects Gravity waves Ground supports Mirrors Modal analysis Optimization Quality control Structural design Telescopes Unloading Vibration analysis Wavefronts
DOI	10.3788/IRLA201847.0818004
收录类别	EI
引用统计
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/60817
专题	中国科学院长春光学精密机械与物理研究所
推荐引用方式 GB/T 7714	Li, Yupeng,Wang, Zhi,Sha, Wei,et al. Structural design of primary mirror subassembly for spatial gravitational wave telescope[J]. Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,2018,47(8).
APA	Li, Yupeng,Wang, Zhi,Sha, Wei,Wu, Qingwen,&Zhao, Ya.(2018).Structural design of primary mirror subassembly for spatial gravitational wave telescope.Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,47(8).
MLA	Li, Yupeng,et al."Structural design of primary mirror subassembly for spatial gravitational wave telescope".Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering 47.8(2018).

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Structural design of（608KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载