Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Secondary mirror supporting structure for 1.2 m telescope | |
Zhao, H.-C.; J.-X. Zhang; F. Yang and Q.-C. An | |
2017 | |
发表期刊 | Guangxue Jingmi Gongcheng/Optics and Precision Engineering |
卷号 | 25期号:10 |
摘要 | A reasonable supporting structure between primary mirror and secondary mirror for a 1.2 m telescope was fabricated to meet its requirement for stiffness and the bandwidth of servo system. A four-vane spider effecting on the primary obstruction and secondary mirror stiffness was explored. The key parameters for the four-vane spider were selected by dynamic molding. Then, a finite element model was established in the ANSYS to perform static analysis and modal analysis. Finally, the modal analysis method was used to test the designed support structure. The finite element analysis shows that the designed structure effected by gravity induces about 0.004 2 coma while the telescope points to the horizon, and the first-order modal frequency is about 57.2 Hz. The modal analysis indicates that the first-order resonance frequency is up to 54.1 Hz, which is in agreement with that of finite element analysis. Experimental results and FEA results are compared, and it shows that it is difficult to extract the modal when the vibration magnitude on the vane is smaller and obtained results are little smaller than that of the FEA, in which the maximum relative error is less than 7%. In conclusion, this design is not only a fewer obstruction but also an excellent stiffness, meeting the requirement of telescopes. 2017, Science Press. All right reserved. |
收录类别 | ei |
语种 | 中文 |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/59474 |
专题 | 中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Zhao, H.-C.,J.-X. Zhang,F. Yang and Q.-C. An. Secondary mirror supporting structure for 1.2 m telescope[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2017,25(10). |
APA | Zhao, H.-C.,J.-X. Zhang,&F. Yang and Q.-C. An.(2017).Secondary mirror supporting structure for 1.2 m telescope.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,25(10). |
MLA | Zhao, H.-C.,et al."Secondary mirror supporting structure for 1.2 m telescope".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 25.10(2017). |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Secondary mirror sup(442KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | 浏览 请求全文 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论