Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Compensation for adjustment error in high positioning accuracy turntable measuring system | |
Yan, Y.-Y.; W. Liu and J.-J. Fu | |
2017 | |
发表期刊 | Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition) |
卷号 | 47期号:3 |
摘要 | A turntable to be used in laser communication laboratory experiments needs positioning accuracy of 1.5. In order to check the technical requirements, a high accuracy angle measurement system, composed of regular polygon error, centering device, 0.2 two-dimensional optoelectronic autocollimation and supporting, was set up. The collimation error of the system was theoretically analyzed, which shows that the off-center between the regular polygon mirror and the turntable contributes little impact on the positioning accuracy of the measurement results, which generally can be ignored. However, the adjustment error of the autocollimation has great influence on the measurement system. In order to eliminate the system error, on the basis of theoretical analysis, a new method based on data processing to compensate the adjustment error was proposed and verified by contrast experiments. Results show that a positioning accuracy =0.936, was obtained by timing experiential fine adjustment, while the positioning accuracy = 0.922 was obtained by the proposed new method. The relative error between and is -1.496%, which satisfies the technical requirement. Contrast experiments also demonstrate that the proposed method is convenient and reliable. 2017, Editorial Board of Jilin University. All right reserved. |
收录类别 | ei |
语种 | 中文 |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/59365 |
专题 | 中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Yan, Y.-Y.,W. Liu and J.-J. Fu. Compensation for adjustment error in high positioning accuracy turntable measuring system[J]. Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition),2017,47(3). |
APA | Yan, Y.-Y.,&W. Liu and J.-J. Fu.(2017).Compensation for adjustment error in high positioning accuracy turntable measuring system.Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition),47(3). |
MLA | Yan, Y.-Y.,et al."Compensation for adjustment error in high positioning accuracy turntable measuring system".Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition) 47.3(2017). |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Compensation for adj(392KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论