CIOMP OpenIR  > 中科院长春光机所知识产出
Design of mirror subassembly in CO2sounder
Wei, Y.-F.; C. Lin; H. Xue and Y.-Q. Zheng
2017
Source PublicationGuangxue Jingmi Gongcheng/Optics and Precision Engineering
Volume25Issue:3
AbstractTo lower the impact of thermal deformation due to gravity, mechanical test, launching environment and linear expansion coefficient difference of the material on mirror surface of the CO2sounder, an analysis was conducted in material selection, structural design and cooperation mode of the mirror subassembly. In the analysis, SiC material was adopted for mirror making, and light weight design was carried out in the mirror body through finite element analysis based on ring-shaped support mode of the mirror; then invar materials with relatively small liner expansion coefficient were selected to design simple and reliable mirror support structure based on stability of the triangle structure and flexible structure of the bipod; the mirror and support structure formed a 1:50 taper surface through epoxy resin adhesive. Then in strict process conditions, precise machining and assembly and mechanical test were conducted in the mirror subassembly. The results show that primary frequencies in the X direction, Y direction and Z direction are respectively 445 Hz, 423 Hz and 444 Hz, approximate to results from the finite element analysis. After such test, the mirror surface shape variation PV is lower than 1/10, with a RMS value lower than 1/30 (=632.8 nm). It proves that structural design and adjustment of the CO2sounder mirror subassembly, which are reasonable, can meet the requirements of imaging spectrometer. 2017, Science Press. All right reserved.
Indexed Byei
Language中文
Document Type期刊论文
Identifierhttp://ir.ciomp.ac.cn/handle/181722/59312
Collection中科院长春光机所知识产出
Recommended Citation
GB/T 7714
Wei, Y.-F.,C. Lin,H. Xue and Y.-Q. Zheng. Design of mirror subassembly in CO2sounder[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2017,25(3).
APA Wei, Y.-F.,C. Lin,&H. Xue and Y.-Q. Zheng.(2017).Design of mirror subassembly in CO2sounder.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,25(3).
MLA Wei, Y.-F.,et al."Design of mirror subassembly in CO2sounder".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 25.3(2017).
Files in This Item: Download All
File Name/Size DocType Version Access License
Design of mirror sub(648KB)期刊论文作者接受稿开放获取CC BY-NC-SAView Download
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Wei, Y.-F.]'s Articles
[C. Lin]'s Articles
[H. Xue and Y.-Q. Zheng]'s Articles
Baidu academic
Similar articles in Baidu academic
[Wei, Y.-F.]'s Articles
[C. Lin]'s Articles
[H. Xue and Y.-Q. Zheng]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Wei, Y.-F.]'s Articles
[C. Lin]'s Articles
[H. Xue and Y.-Q. Zheng]'s Articles
Terms of Use
No data!
Social Bookmark/Share
File name: Design of mirror subassembly in.pdf
Format: Adobe PDF
This file does not support browsing at this time
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.