Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Thermal conductivity enhancement design for carbon-fiber truss of space camera | |
Liu, G.; L. Guo; R.-C. Hu and Q.-W. Wu | |
2017 | |
发表期刊 | Guangxue Jingmi Gongcheng/Optics and Precision Engineering |
卷号 | 25期号:9 |
摘要 | As the carbon-fiber reinforced polymer (CFRP) composite material common used for truss structure of space camera has the drawback of low thermal conductivity, great temperature gradient is easily formed in the truss. The method that copper grid was adhered and aluminum film was pasted on the surface of CFRP was proposed to enhance thermal conductivity for carbon-fiber truss of a space camera. Firstly, thermal conductivity model of CFRP was established. Then heat transfer models for four kinds of plates(including bare CFRP plate, two plates respectively pasted aluminum films of 0.05 mm and 0.5 mm, and one plate adhered copper grid with equivalent diameter as 0.08 mm on the surface) were established, and corresponding thermal analysis was conducted on the four different states of plates. Then equivalent thermal conductivities of four kinds of plates were obtained through finite element software. Test result indicates: equivalent thermal conductivity could be improved in different degrees through adhering copper grid/pasting aluminum film on the surface of CFRP. Structural equivalent thermal conductivity was increased to 41.3 W/(mK) to paste aluminum film of 0.5 mm on the plate surface of CFRP. Finally, thermal design was conducted on carbon-fiber truss of a certain space camera according to structural equivalent thermal conductivity in the test. Thermal analysis result of truss structure indicates that axial temperature difference of a single truss rod reduces from 6.8 to 0.8, and the temperature uniformity of truss structure is significantly improved. 2017, Science Press. All right reserved. |
收录类别 | ei |
语种 | 中文 |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/59066 |
专题 | 中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Liu, G.,L. Guo,R.-C. Hu and Q.-W. Wu. Thermal conductivity enhancement design for carbon-fiber truss of space camera[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2017,25(9). |
APA | Liu, G.,L. Guo,&R.-C. Hu and Q.-W. Wu.(2017).Thermal conductivity enhancement design for carbon-fiber truss of space camera.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,25(9). |
MLA | Liu, G.,et al."Thermal conductivity enhancement design for carbon-fiber truss of space camera".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 25.9(2017). |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Thermal conductivity(473KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论