Multi-objective topology optimization design and test for support structure of star sensor

	Multi-objective topology optimization design and test for support structure of star sensor
	Cheng, L.; D. Wang; S. Gu; F. Gao; L. Yang and L. Li
	2017
发表期刊	Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering
卷号	46 期号:5
摘要	According to the special requirements of star sensor for micro satellite, combined with special working performance and environment of star sensor, multi-objective optimization design was carried out on the support structure of star sensor by using topological method, and finite element analysis and test were also done. First, the basic theory of modal analysis and random vibration response were introduced in this paper. The expression formula of multi-objective topology optimization was derived. Second, the goal of optimization contains volume minimization of the support structure, and RMS value minimization of 4 installation point in the support structure where star sensor was installed. The topology optimization model of the support structure was established under the restriction of the lowest natural frequency. The topology optimization design was carried out by using OptiStruct software. Then, the modal analysis and random vibration response analysis of the optimized support structure were made by using finite element analysis software MSC.PatranNastran. The natural frequency was 327 Hz, the maximum amplification rate of the RMS value of the installation point was 0.55. Finally, the support structure was tested with the random vibration test. The test results are in good agreement with the finite element analysis results, and the maximum error is 0.07. The support structure of star sensor meets the requirements of the performance index for micro satellite. 2017, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.
收录类别	ei
语种	中文
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/58864
专题	中科院长春光机所知识产出
推荐引用方式 GB/T 7714	Cheng, L.,D. Wang,S. Gu,et al. Multi-objective topology optimization design and test for support structure of star sensor[J]. Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,2017,46(5).
APA	Cheng, L.,D. Wang,S. Gu,F. Gao,&L. Yang and L. Li.(2017).Multi-objective topology optimization design and test for support structure of star sensor.Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,46(5).
MLA	Cheng, L.,et al."Multi-objective topology optimization design and test for support structure of star sensor".Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering 46.5(2017).

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Multi-objective topo（1291KB）	期刊论文	作者接受稿	开放获取	CC BY-NC-SA	浏览下载