Characteristics of rear support in centre for space SiC Mirror

	Characteristics of rear support in centre for space SiC Mirror
	Bao, Q.-H.; W. Sha; C.-Z. Chen and J.-Y. Ren
	2017
发表期刊	Guangzi Xuebao/Acta Photonica Sinica
卷号	46 期号:2
摘要	Taking a SiC mirror with an aperture of 500mm for example, the supporting characteristic of rear support in centre was studied based on spercific lightweight shape and supporting structure by using finite element analysis, and the effects of structural parameters on the performance were analyzed. The analyses point out that the optimal proportion of the diameter of support hole to the aperture of mirror is 0.23, the optimal rear shape of mirror with different aperture should be determined by using optimization method, and the surface accuracy can be improved by increasing the support depth when the gravity in radial direction. The analyses of supporting structure indicate that the radius of bolt circle at the bottom of the flexible connector is the key factor which has great influence on both the surface accuracy under the load case of temperature variation and the first order frequency of mirror subassembly, so it is considerable to weigh the requirment of surface accuracy and structural basic frequency when chosing the optimal value of the radius. The surface accuracy of the mirror supported by rear in centre is less affected by the assembling stress from outside and not sensitive to notch depth changing. The support length has a great influence on dynamic stiffness of the structure and its decrease will increase the first order frequency of mirror subassembly. Finally the maximum aperture of the space SiC mirror supported by rear in centre is intended to be 750 mm, which means that the mirror supported by rear in centre without of structural constraint can be satisfied with the refered requirment when its aperture is less than 750 mm. 2017, Science Press. All right reserved.
收录类别	ei
语种	中文
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/58827
专题	中科院长春光机所知识产出
推荐引用方式 GB/T 7714	Bao, Q.-H.,W. Sha,C.-Z. Chen and J.-Y. Ren. Characteristics of rear support in centre for space SiC Mirror[J]. Guangzi Xuebao/Acta Photonica Sinica,2017,46(2).
APA	Bao, Q.-H.,W. Sha,&C.-Z. Chen and J.-Y. Ren.(2017).Characteristics of rear support in centre for space SiC Mirror.Guangzi Xuebao/Acta Photonica Sinica,46(2).
MLA	Bao, Q.-H.,et al."Characteristics of rear support in centre for space SiC Mirror".Guangzi Xuebao/Acta Photonica Sinica 46.2(2017).

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Characteristics of r（1920KB）	期刊论文	作者接受稿	开放获取	CC BY-NC-SA	浏览下载