Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Design and buckling analysis of TMT tertiary mirror cell assembly flexure structure | |
Guo, P.; J. Zhang; F. Yang; H. Zhao and F. Wang | |
2015 | |
发表期刊 | Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering |
卷号 | 44期号:12页码:3650-3655 |
摘要 | Thirty Meter Telescope's tertiary mirror is an elliptical ceramic glass reflector whose major axis is 3.594 m and minor axis is 2.536 m. Flexure structure was widely used in the mirror's support structure to release all the other degree of freedom except those along the support direction. The design decoupled the axial and lateral support and reduce the thermal stress due to the material mismatch. The higher compliance would benefit the telescope's mirror surface under distortion, but the buckling criteria load would decrease correspondingly, either. So the limit load of each flexure structure should be calculated as the design input. And the buckling safety factor SFBucklingwas analyzed for each part under the limit loads. Eigenvalue buckling analysisand nonlinear buckling analysis were both taken and compared. Based on the analysis results, the design were optimized iteratively to achieve balanced values of compliance for all the flexure. The mirror surface error under thermal distortion met the design requirements. 2015, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved. |
文章类型 | 期刊论文 |
收录类别 | EI |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/56268 |
专题 | 中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Guo, P.,J. Zhang,F. Yang,et al. Design and buckling analysis of TMT tertiary mirror cell assembly flexure structure[J]. Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,2015,44(12):3650-3655. |
APA | Guo, P.,J. Zhang,F. Yang,&H. Zhao and F. Wang.(2015).Design and buckling analysis of TMT tertiary mirror cell assembly flexure structure.Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,44(12),3650-3655. |
MLA | Guo, P.,et al."Design and buckling analysis of TMT tertiary mirror cell assembly flexure structure".Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering 44.12(2015):3650-3655. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
TMT三镜镜室组件柔性结构设计与屈曲分析(934KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论