Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Calculation of removal function of ion beam figuring and polishing experiment | |
Tang, W.![]() | |
2015 | |
发表期刊 | Guangxue Jingmi Gongcheng/Optics and Precision Engineering
![]() |
卷号 | 23期号:1页码:31-39 |
摘要 | As the method to get the removal function by traditional Ion Beam Figuring (IBF) has complicated operation and higher costs, this paper proposes a new method to calculate the removal function. The method uses the Faraday cup scan to measure and calibrate the temporal distribution of ion beams and to obtain the different working parameters of ion sources which corresponds to removal functions. Firstly, the material removal theory of IBF was studied based on the Sigmund sputtering theory, and the influence of ion beam distribution on the removal function was researched. A simplified IBF removal function model was proposed. Then, an experiment was conducted to obtain the relationship between the temporal distribution of ion beam and the related parameter of removal function, and the different removal functions of various working parameters were calculated with the combination of the basic removal experiment and Faraday cup scan results. Experiments were performed on silicon and fused silica, and the experimental results show that the peak value of the removal function for the same material is proportional to the that of the scan result. A mirror with a 800 mm silicon flat modification layer was polished, obtained the Root Mean Square(RMS) of surface error is 57.866 nm. After polishing for two times, the RMS is 11.837 nm, and the convergence rate is up to 4.89. These results meet the requirements of optical fabrication for polishing accuracy and improve the determining efficiency for removal functions. , 2015, Chinese Academy of Sciences. All right reserved. |
文章类型 | 期刊论文 |
收录类别 | EI |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/56091 |
专题 | 中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Tang, W.,W.-J. Deng,L.-G. Zheng and X.-J. Zhang. Calculation of removal function of ion beam figuring and polishing experiment[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2015,23(1):31-39. |
APA | Tang, W.,W.-J. Deng,&L.-G. Zheng and X.-J. Zhang.(2015).Calculation of removal function of ion beam figuring and polishing experiment.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,23(1),31-39. |
MLA | Tang, W.,et al."Calculation of removal function of ion beam figuring and polishing experiment".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 23.1(2015):31-39. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
离子束抛光去除函数计算与抛光实验.caj(366KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论