Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Design of electromagnetic compatibility for vehicular optic-electronic equipment | |
Qiao, J.; L. Shi; W.-B. Zhang; X.-Y. Xue; L. Zhang and L.-H. Cao | |
2015 | |
发表期刊 | Guangxue Jingmi Gongcheng/Optics and Precision Engineering |
卷号 | 23页码:447-452 |
摘要 | The design method of electromagnetic compatibility of the vehicular optic-electronic equipment and corresponding electromagnetic anti-interference measures were proposed to improve its electromagnetic interference ability and operating reliability at the complicated electromagnetic environment. The components were introduced based on the vehicular opto-electronic equipment in this paper. At the same time, the electromagnetic compatibilities of the mechanism and electricity were designed, including opto-electronic equipment and the shielding shelter. To overcome the electromagnetic interference between wires in interconnect cables, the electromagnetic anti-inference measures, such as the cable choice, cable layout and earthing mode were introduced emphatically. According to the characters of weak electromagnetic interference resistance in the poor electromagnetic environment, the specific settlement measures were proposed in detail. Finally, the design method of electromagnetic compatibility was discussed as well. The tests were performed at an electromagnetic environment of RE102 (10 kHz-18 GHz field radiation). Experimental results indicate that the vehicular opto-electronic equipment can work successfully and reliably in this condition above mentioned. It provides important design methods of the electromagnetic compatibility for the kindred opto-electronic equipment and can satisfy the system requirements of strong anti-jamming and stabilization. 2015, Chinese Academy of Sciences. All right reserved. |
文章类型 | 期刊论文 |
收录类别 | EI |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/56082 |
专题 | 中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Qiao, J.,L. Shi,W.-B. Zhang,et al. Design of electromagnetic compatibility for vehicular optic-electronic equipment[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2015,23:447-452. |
APA | Qiao, J.,L. Shi,W.-B. Zhang,X.-Y. Xue,&L. Zhang and L.-H. Cao.(2015).Design of electromagnetic compatibility for vehicular optic-electronic equipment.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,23,447-452. |
MLA | Qiao, J.,et al."Design of electromagnetic compatibility for vehicular optic-electronic equipment".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 23(2015):447-452. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
车载光电设备电磁兼容的设计.pdf(1564KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论