CIOMP OpenIR  > 中科院长春光机所知识产出
Tunable complementary frequency selective surfaces based on cross-elements
Jiao J.; Xu N.-X.; Feng X.-G.; Li Y.-D.; Gao J.-S.
2014
发表期刊Guangxue Jingmi Gongcheng/Optics and Precision Engineering
ISSNISBN/1004924X
卷号22期号:6页码:1430-1437
摘要To tune the operating frequency of a Frequency Selective Surface (FSS), the load impedance of the loop slot FSS forms was separated to an inductive surface and a capacitive surface, and the coupling mechanism between the two surfaces was used to develop a Complementary FSS(CFSS). An equivalent circuit model of the CFSS was established and its tunable resonance mechanism was analyzed quantitatively. The influences of the rotating angle of the load patch, coupled dielectric thickness and the relative dielectric constant on the transmission characteristics of the CFSS were calculated accurately by using the coupled integral equation method, then the inductive surface and the capacitive surface were fabricated on both sides of the coupled dielectric by the coating and lithography methods. The transmission response of a 250 mm 250 mm CFSS prototype was measured by using the free space method. The calculated and measured results show that the CFSS resonance will be tuned from 18.2 GHz to 14.8 GHz by rotating the cross patch from 0 degree to 10 degree. The coupling effect between the capacitive surface and the inductive surface will disappear by increasing the physical thickness of the coupling dielectric from 0.1 mm to 1 mm. With increasing the relative dielectric constant of the coupling medium, the coupling between the CFSSs will be strengthened and the operating frequency will shift to lower frequencies. It concludes that the CFSS can realize the active resonance conversion function as the rotating angle changes, which provides references for the design and manufacture of active FSSs.
收录类别EI
语种中文
文献类型期刊论文
条目标识符http://ir.ciomp.ac.cn/handle/181722/44484
专题中科院长春光机所知识产出
推荐引用方式
GB/T 7714
Jiao J.,Xu N.-X.,Feng X.-G.,et al. Tunable complementary frequency selective surfaces based on cross-elements[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2014,22(6):1430-1437.
APA Jiao J.,Xu N.-X.,Feng X.-G.,Li Y.-D.,&Gao J.-S..(2014).Tunable complementary frequency selective surfaces based on cross-elements.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,22(6),1430-1437.
MLA Jiao J.,et al."Tunable complementary frequency selective surfaces based on cross-elements".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 22.6(2014):1430-1437.
条目包含的文件 下载所有文件
文件名称/大小 文献类型 版本类型 开放类型 使用许可
基于十字单元的可调谐互补屏频率选择表面.(1733KB) 开放获取CC BY-ND浏览 下载
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Jiao J.]的文章
[Xu N.-X.]的文章
[Feng X.-G.]的文章
百度学术
百度学术中相似的文章
[Jiao J.]的文章
[Xu N.-X.]的文章
[Feng X.-G.]的文章
必应学术
必应学术中相似的文章
[Jiao J.]的文章
[Xu N.-X.]的文章
[Feng X.-G.]的文章
相关权益政策
暂无数据
收藏/分享
文件名: 基于十字单元的可调谐互补屏频率选择表面.pdf
格式: Adobe PDF
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。