Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Six degrees of freedom vibration transmissibility measurement of flexural opto-mechanical structures with 3-axis acceleration sensors | |
Yuan W. Q.; Wu Z. H.; Sui Y. X. | |
2014 | |
发表期刊 | Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology |
ISSN | ISBN/0141-6359 |
卷号 | 38期号:3页码:561-568 |
摘要 | At an early stage of a high-resolution flexural opto-mechanical system design, it is essential to analyze its dynamic characteristics for assessing image quality due to environmental vibration, an experimental method to measure six degrees of freedom (6-DoFs) vibration transmissibility of flexural opto-mechanical structures is proposed in this article. A typical flexural opto-mechanical structure consists of an optical component, a mechanical component and several flexural modules. Using the developed method, optical and mechanical components are considered as rigid bodies. Two feature points which are uncoupled in motion are set in the components separately, and they can express 6-DoFs vibration of each component moderately. Several key points are set in each component too, and their vibrational accelerations are measured with 3-axis acceleration sensors firstly. Then, motion relations between the feature points and key points are established, 6-DoFs vibrational acceleration spectrums of the two feature points are analyzed, and 6-DoFs vibration transmissibility between them is calculated. Thirdly, the experiment is carried out for twenty times, and average 6-DoFs vibration transmissibility is calculated. Uncertainties of this method are discussed with numerical analysis and experiments. (C) 2014 Elsevier Inc. All rights reserved. |
收录类别 | SCI |
语种 | 英语 |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/44373 |
专题 | 中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Yuan W. Q.,Wu Z. H.,Sui Y. X.. Six degrees of freedom vibration transmissibility measurement of flexural opto-mechanical structures with 3-axis acceleration sensors[J]. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology,2014,38(3):561-568. |
APA | Yuan W. Q.,Wu Z. H.,&Sui Y. X..(2014).Six degrees of freedom vibration transmissibility measurement of flexural opto-mechanical structures with 3-axis acceleration sensors.Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology,38(3),561-568. |
MLA | Yuan W. Q.,et al."Six degrees of freedom vibration transmissibility measurement of flexural opto-mechanical structures with 3-axis acceleration sensors".Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology 38.3(2014):561-568. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Yuan-2014-Six degree(3324KB) | 开放获取 | CC BY-ND | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论