Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Design and analysis of a precision axial adjusting mechanism for optical elements in lithographic lens | |
Peng H.-F.; Sun Z. | |
2014 | |
发表期刊 | Guangzi Xuebao/Acta Photonica Sinica |
ISSN | ISBN/10044213 |
卷号 | 43期号:4 |
摘要 | The combination of flexure and PZT actuator is a significant method to achieve precision adjustment. A precision adjusting mechanism with flexure hinges was introduced and theoretical calculations were carried out to get the working principle of it. The optimization design and finite element analysis were also taken to acquire the axial stiffness of a typical opto-mechanic structure. The results show that the maximum axial displacement of the optics can be bigger than 200 m under the yield limit of the material. Secondly, a modal analysis is taken to obtain the natural frequency of the mechanism. The results indicated that the first resonant frequency of the structure is 185.1 Hz. It can be seen that the natural frequency can satisfy the work specification of the lithographic lens. At last, the influence of the applied force of the PZT to the surface figure of an optical element was obtained. The result shows that the influence of the force F=14N to the RMS of the optic element is 4.41 nm. All these results provide useful evidences for the applyment of this mechanism for optic adjusting. |
收录类别 | EI |
语种 | 中文 |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/43831 |
专题 | 中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Peng H.-F.,Sun Z.. Design and analysis of a precision axial adjusting mechanism for optical elements in lithographic lens[J]. Guangzi Xuebao/Acta Photonica Sinica,2014,43(4). |
APA | Peng H.-F.,&Sun Z..(2014).Design and analysis of a precision axial adjusting mechanism for optical elements in lithographic lens.Guangzi Xuebao/Acta Photonica Sinica,43(4). |
MLA | Peng H.-F.,et al."Design and analysis of a precision axial adjusting mechanism for optical elements in lithographic lens".Guangzi Xuebao/Acta Photonica Sinica 43.4(2014). |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
光刻物镜中光学元件精密轴向调整机构的设计(500KB) | 开放获取 | CC BY-ND | 浏览 下载 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
谷歌学术 |
谷歌学术中相似的文章 |
[Peng H.-F.]的文章 |
[Sun Z.]的文章 |
百度学术 |
百度学术中相似的文章 |
[Peng H.-F.]的文章 |
[Sun Z.]的文章 |
必应学术 |
必应学术中相似的文章 |
[Peng H.-F.]的文章 |
[Sun Z.]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论