Changchun Institute of Optics,Fine Mechanics and Physics,CAS
莫尔条纹光电信号自动补偿技术研究 | |
高旭 | |
学位类型 | 博士 |
导师 | 万秋华 |
2014-07 | |
学位授予单位 | 中国科学院大学 |
学位专业 | 机械电子工程 |
摘要 | 随着跟瞄武器装备跟踪精度、卫星导航系统定位精度的提高,研制适用于复杂工作条件下的高精度、高分辨力绝对式光电轴角编码器成为军事工业领域亟待解决的难点。光电轴角编码器的测角精度主要受制于莫尔条纹光电信号的细分精度,而细分精度的大小取决于精码莫尔条纹光电信号的质量,因此开展莫尔条纹光电信号自动补偿技术研究对于实现光电轴角编码器的高精度、高分辨力以及保证其在恶劣工作环境下的精确测量具有重要意义。 通过阅读国内外文献,首先从莫尔条纹产生机理出发,讨论了高精度编码器莫尔条纹光电信号的形成、引起莫尔条纹光电信号产生偏差的根本因素、高精度编码器的细分技术以及莫尔条纹光电信号质量偏差引起细分误差的空间分布特征,指出研究莫尔条纹光电信号自动补偿方法的关键性。 提出了基于Hilbert变换的莫尔条纹光电信号正交性偏差自动补偿算法。利用希尔伯特变换原理,构造同频光电信号正交性偏差的动态测量算法;通过莫尔条纹光电信号数学模型,建立角度代码补偿查找表;并设计了同步处理的补偿方式,实现莫尔条纹光电信号正交性偏差的自动补偿。 提出了基于粒子群优化算法的莫尔条纹光电信号正弦性偏差自动补偿算法。采用傅里叶变换理论,研究了高精度光电编码器信号正弦性偏差的主要谐波成分,建立了信号波形的数学方程及信号细分误差的补偿模型;设计了基于粒子群优化算法的信号波形参数辨识方法,实现了信号正弦性偏差的自动补偿。 构建了莫尔条纹光电信号自动补偿系统。提出了莫尔条纹光电信号直流电平漂移、等幅性偏差的自动补偿方法。研究并融合了莫尔条纹光电信号各个偏差的自动补偿方法,建立了莫尔条纹光电信号细分误差的综合补偿模型,实现对莫尔条纹光电信号的综合自动补偿,提高了光电编码器的细分精度和环境适应能力。 运用本文研究的方法对高精度光电编码器实际莫尔条纹光电信号进行补偿处理,可满足高精度光电编码器分辨力的要求,经实际测试24位高精度编码器细分误差可减少0.61"。实验结果表明:本文提出的莫尔条纹光电信号自动补偿方法,能够提高编码器的细分精度、环境适应性和可靠性,研制的自动补偿系统可作为编码器的备处理系统或误差诊断系统,对于研制超高精度的光电轴角编码器和提高光电编码器的测角稳定性具有实用意义。 |
其他摘要 | In order to improve the precision of tracking weapons and equipment and the positioning accuracy of satellite navigation system, the research of high-resolution absolute photoelectric shaft encoder with high accuracy under complex working conditions is needed. And this becomes a difficulty in the military industry. The angle measurement accuracy of photoelectric shaft encoder is mainly subject to the subdivision precision of Moire fringe photoelectric signal. And the subdivision precision depends on the quality of Moire fringe precise code signal. So the research of automatic compensation technology is to be of significance to realize the high accuracy and high resolution of photoelectric shaft encoder. By reading domestic and foreign literature, the composition of Moire fringe photoelectric signal of high-precision encoder is discussed. Fundamental factors which lead to the deviation of Moire fringe photoelectric signal and the spatial distribution characteristic of subdivision error which is caused by the deviation of Moire fringe photoelectric signal are also discussed. The key point of automatic compensation method of Moire fringe photoelectric signal is pointed out. The method of real-time compensation of orthogonality deviation for the Moire fringe photoelectric signal based on Hilbert transform theory was proposed. Dynamic measurement algorithm for the orthogonality deviation of same frequency photoelectric signal using Hilbert transform theory was constructed. In the light of mathematical model for Moire fringe photoelectric signal, lookup table for angle code compensation was established and the synchronous processing mode was adopted, real-time compensation of orthogonality deviation for the photoelectric signal was achieved. The method of automatic compensation of sine deviation for the Moire fringe photoelectric signal based on the particle swarm optimization algorithm was proposed. The main harmonic components of sine deviation for high precision photoelectric encoder signal using Fourier algorithm were revealed, waveform equation was established and compensation model of subdivision error was set up. The identification method for signal waveform parameter based on particle swarm optimization algorithm was designed. Automatic compensation of sinusoidal deviation for the photoelectric signal was achieved. The automatic compensation system for Moire fringe photoelectric signal was established. The automatic compensation method of DC level drift and the amplitude of deviation for Moire fringe photoelectric signal was proposed. Automatic compensation method of each error for Moire fringe photoelectric signal was researched and syncretized. A comprehensive compensation model of the Moire fringe photoelectric signal subdivision error was established. The comprehensive automatic compensation of the Moire fringes photoelectric signal was realized. It can improve the subdivision accuracy, environmental adaptability and reliability of the encoder. Moire fringe photoelectric signal of high precision photoelectric encoder was compensated and analysed using this method of this paper research, it was sufficient to the technical index of the quality for high precision encoder Moire fringe photoelectric signal. To conduct an experiment, the subdivision error of the Moire fringes photoelectric signal for a 24-bit photoelectric encoder was reduced 0.61". The experimental results showed that the method of automatic compensation of this paper research can improve the subdivision accuracy, environmental adaptability and reliability of the encoder. The automatic compensation system can be used as the preparation processing system or error diagnosis system of the encoder, it is very practical for development of photoelectric shaft encoder ultra high precision and improve the angle stability of photoelectric encoder. |
语种 | 中文 |
文献类型 | 学位论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/41408 |
专题 | 中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | 高旭. 莫尔条纹光电信号自动补偿技术研究[D]. 中国科学院大学,2014. |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
高旭.pdf(2763KB) | 开放获取 | CC BY-NC-SA | 请求全文 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
谷歌学术 |
谷歌学术中相似的文章 |
[高旭]的文章 |
百度学术 |
百度学术中相似的文章 |
[高旭]的文章 |
必应学术 |
必应学术中相似的文章 |
[高旭]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论