Effects of machining accuracy on frequency response properties of thick-screen frequency selective surface

	Effects of machining accuracy on frequency response properties of thick-screen frequency selective surface
	Fang C. Y.; Gao J. S.; Xin C.
	2012
发表期刊	Optical Engineering
ISSN	0091-3286
卷号	51 期号:10
摘要	Electromagnetic theory shows that a thick-screen frequency selective surface (FSS) has many advantages in its frequency response characteristics. In addition, it can be used to make a stealth radome. Therefore, we research in detail how machining accuracy affects the frequency response properties of the FSS in the gigahertz range. Specifically, by using the least squares method applied to machining data, the effects of different machining precision in the samples can be calculated thus obtaining frequency response curves which were verified by testing in the near-field in a microwave dark room. The results show that decreasing roughness and flatness variation leads to an increase in the bandwidth and that an increase in spacing error leads to the center frequency drifting lower. Finally, an increase in aperture error leads to an increase in bandwidth. Therefore, the conclusion is that machining accuracy should be controlled and that a spatial error less than 0.05 mm is required in order to avoid unwanted center frequency drift and a transmittance decrease. (C) 2012 Society of Photo-Optical Instrumentation Engineers (SPIE). [DOI: 10.1117/1.OE.51.10.103402]
收录类别	SCI
语种	英语
文献类型	期刊论文
条目标识符	http://ir.ciomp.ac.cn/handle/181722/34152
专题	中科院长春光机所知识产出
推荐引用方式 GB/T 7714	Fang C. Y.,Gao J. S.,Xin C.. Effects of machining accuracy on frequency response properties of thick-screen frequency selective surface[J]. Optical Engineering,2012,51(10).
APA	Fang C. Y.,Gao J. S.,&Xin C..(2012).Effects of machining accuracy on frequency response properties of thick-screen frequency selective surface.Optical Engineering,51(10).
MLA	Fang C. Y.,et al."Effects of machining accuracy on frequency response properties of thick-screen frequency selective surface".Optical Engineering 51.10(2012).