Changchun Institute of Optics,Fine Mechanics and Physics,CAS
Study of formation mechanism of barium hexaferrite by sintering curve | |
其他题名 | 论文其他题名 |
Wang H. Z.; He Q.; Wen G. H.; Wang F.; Ding Z. H.; Yao B. | |
2010 | |
发表期刊 | Journal of Alloys and Compounds |
ISSN | 0925-8388 |
卷号 | 504期号:1页码:70-75 |
摘要 | Barium hexaferrite (BaFe(12)O(19)) with hexagonal structure was fabricated by sintering the mixture of alpha-Fe(2)O(3) and BaCO(3), ball milling of the mixture followed by heat treatment as well as glycin-nitrate method and subsequent heat treatment, respectively. The mechanism of formation of the BaFe(12)O(19) in the three kinds of procedures was investigated by using sintering shrinkage curve and XRD measurements. It was found that the alpha-Fe(2)O(3) reacted with BaCO(3) to form BaFe(2)O(4) with orthorhombic structure as the mixture were sintered above 660 degrees C firstly and then the BaFe(2)O(4) reacted with alpha-Fe(2)O(3) to form BaFe(12)O(19) in a sintering temperature ranging from 770 to 920 degrees C. However, the alpha-Fe(2)O(3) reacted with BaCO(3) to form Ba(x)Fe(3-x)O(4) with spinel structure when the mixture was milled for 80 h, while the BaFe(12)O(19) was obtained by annealing the Ba(x)Fe(3-x)O(4) at 700-1000 degrees C. In the glycin-nitrate procedure, the precursor powders containing alpha-Fe(2)O(3), Fe(3)O(4) and BaFe(2)O(4) were fabricated by self-propagating reaction firstly, and then the single BaFe(12)O(19) was produced by sintering the precursor powders at 1000 degrees C. The magnetic properties of the BaFe(12)O(19) produced by the three kinds of procedures were reached. The saturation magnetization and the coercivity of the BaFe(12)O(19) fabricated by ball milling followed by heat treatment were 47.24 emu/g and 5086.340e, respectively, which were much larger than those of the BaFe(12)O(19) produced by other procedures. The mechanism leading to that the BaFe(12)O(19) produced by the different methods had different magnetic properties was discussed in the present work. Crown Copyright (C) 2010 Published by Elsevier B.V. All rights reserved. |
收录类别 | SCI ; EI |
语种 | 英语 |
文献类型 | 期刊论文 |
条目标识符 | http://ir.ciomp.ac.cn/handle/181722/26181 |
专题 | 中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Wang H. Z.,He Q.,Wen G. H.,et al. Study of formation mechanism of barium hexaferrite by sintering curve[J]. Journal of Alloys and Compounds,2010,504(1):70-75. |
APA | Wang H. Z.,He Q.,Wen G. H.,Wang F.,Ding Z. H.,&Yao B..(2010).Study of formation mechanism of barium hexaferrite by sintering curve.Journal of Alloys and Compounds,504(1),70-75. |
MLA | Wang H. Z.,et al."Study of formation mechanism of barium hexaferrite by sintering curve".Journal of Alloys and Compounds 504.1(2010):70-75. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Wang-2010-Study of f(362KB) | 开放获取 | -- | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论